邢书明,姚书芳,孙世宝,等.加压凝固过程的谐调方程[J].中国铸造装备与技术,1997(1): 46-49.XING Shu-ming,YAO Shu-fang,SUN Shi-bao,et al.Pressed solidification process equation of compatibility[J].China Foundry Machinery & Technology,1997(1): 46-49.
[2]
Johansen H,Kristiansen J D,Gjersoe R,et al.RDX and HMX with reduced sensitivity towards shock initiation-RS-RDX and RS-HMX[J].Propellants,Explosives,Pyrotechnics,8,3(1): 20-24.
[3]
花成,黄明,黄辉,等.RDX/HMX炸药晶体内部缺陷表征与冲击波感度研究[J].含能材料,0,8(2): 152-157.HUA Cheng,HUANG Ming,HUANG Hui,et al.Intragranular defects and shock sensitivity of RDX/HMX[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),0,8(2): 152-157.
[4]
黄亨建,董海山,舒远杰,等.HMX中晶体缺陷的获得及其对热感度和热安定性的影响[J].含能材料,3,1(3): 123-126.HUANG Heng-jian,DONG Hai-shan,SHU Yuan-jie,et al.The Preparation of HMX crystals with defects and the influences of crystal defects on thermal sensitivity and stability[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),3,1(3): 123-126.
[5]
Stoltz C A,Manson B P,Hooper J.Neutron scattering study of internal void structure in RDX[J].Journal of Applied Physics,0,7(5): 1-6.
[6]
王宇,芮久后,冯顺山.装药缺陷对熔铸炸药爆速影响的实验研究[J].北京理工大学学报,1,1(7): 757-760.WANG Yu,RUI Jiu-hou,FENG Shun-shan.Experimental research of the charge defects influence on detonation velocity of melting-cast explosive[J].Transactions of Beijing Institute of Technology,1,1(7): 757-760.
[7]
万里,加藤锐次,野村宏之.局部加压铝合金的凝固变化及其数值模拟[J].特种铸造及有色合金,5,5(11): 658-661.WAN Li,EIJI Kato,HIROYUKI Nomura.Solidification analysis and its numerical simulation of aluminum alloy under local pressurization[J].Special Casting & Nonferrous Alloys,5,5(11): 658-661.
[8]
王英杰,贾泮江,于桂林.铝合金真空吸铸加压凝固技术研究[J].铸造技术,2000(6): 11-12.WANG Ying-jie,JIA Pan-jiang,YU Gui-lin.Research of vacuum suction and solidification under pressure of aluminium casting[J].Foundry Technology,2000(6): 11-12.
[9]
沈惠民.用加压凝固工艺防止精铸铝模板表面缩凹[J].特种铸造及有色合金,1999(1): 26-27.SHEN Hui-ming.Preventing aluminum pattern plate from surface sinking with pressurized solidification in ceramic mold[J].Special Casting & Nonferrous Alloys,1999(1): 26-27.
[10]
Sun Da-wei,Garimella S V,Singh S,et al.Numerical and experimental investigation of the melt casting of explosives[J].Propellants,Explosives,Pyrotechnics,5,0(5): 369-380.
[11]
王贵,杨莉,周铁涛.熔模精铸件凝固过程温度场的数值模拟[J].北京航空航天大学学报,0,6(3): 249-251.WANG Gui,YANG Li,ZHOU Tie-tao.Numerical simulation of temperature field for investment casting solidification process[J].Journal of Beijing University of Aeronautics and Astronautics,0,6(3): 249-251.
[12]
郭朋林,罗观,习彦,等.TNT基熔铸炸药冷却过程温度场变化规律研究[J].含能材料,0,8(1): 93-96.GUO Peng-lin,LUO Guan,XI Yan,et al.Distribution of temperature field during cooling process of melt-cast explosive[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),0,8(1): 93-96.
[13]
Witt W,Sabranski U.A new method for cast-loading mixtures of explosives[J].Propellants and Explosive,9,4: 1-3.
[14]
张金勇,胡双启,曹雄.两种新型装药工艺.工业安全与环保[J].6,2(4): 56-57.ZHANG Jin-yong,HU Shuang-qi,CAO Xiong.Introductions on two kinds of new type charging process[J].Industrial Safety and Environmental Protection,6,2(4): 56-57.
[15]
陈熙荣,吴风元,刘德润.用压力注装获得高效率、优质药柱的研究[J].火炸药,1,5(6): 13-16.CHEN Xi-rong,WU Feng-yuan,LIU De-run.The study of obtaining high effective and high quality grain by pressure pouring charge process[J].HUO ZHA YAO,1,5(6): 13-16.
[16]
谢志毅,王冬磊,刘建波,等.炸药熔铸过程数值模拟研究[C]∥四川省电子学会计算机工程与应用专业委员会年会及学术交流论文集.成都.2011: 136-141.XIE Zhi-yi,WANG Dong-lei,LIU Jian-bo,et al.Numerical simulation of melt-cast explosive solidification process[C]∥The Annual Symposium of Computer Engineering and application Committee of Sichuan Electronic Society.Chengdu.2011: 136-141.
