王凯民,张学舜.火工品工程设计与试验[M].北京: 国防工业出版社,2010.WANG Kai-min, ZHANG Xue-shun.Design and test of initiating explosive device engineering[M].Beijing: National Defence Industry Press,2010.
[2]
韩一丁.金属薄膜电桥机构及特性研究[D].北京: 北京理工大学, 2006.HAN Yi-ding.Research on metal film bridge mechanism and characteristics [D].Beijing: Beijing Institute of Technology, 2006.
Kaili Zhang.A nano initiator realized by integrating Al/CuO-based nanoenergetic materials with a Au/Pt/Cr microheater[J].Journal of Microelectromechanical Systems, 2008,17(4): 832-836.
[6]
Jongkwang Lee.Design and performance evaluation of components of micro solid propellant thruster[C]∥Joint Propulsion Conference and Exhibit.Fort Lauderdale, 2004.
[7]
王广海, 李国新, 阿苏娜.薄膜桥火工品的制备与性能研究[J].含能材料, 2008,16(5): 543-547.WANG Guang-hai, LI Guo-xin, A Su-na.Preparation and properties of thin film bridge EED[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2008,16(5): 543-547.
[8]
闫卫平, 朱剑波, 马灵芝,等.金属薄膜加热器的研究[J].传感技术学报.2004, (4): 615-618.YAN Wei-ping, ZHU Jian-bo, MA Ling-zhi, et al.Research of metal membrane heater[J].Chinese Journal of Sensors and Actuators.2004, (4): 615-618.
[9]
张以忱.真空镀膜技术[M].北京: 冶金工业出版社,2011.ZHANG Yi-chen.Vacuum coating technology [M].Beijing: Metallurgical Industry Press, 2011.
[10]
GJB5309.14-2004.火工品试验方法静电放电试验[S].GJB5309.14-2004.Test method for electrostatic discharge test of explosive products[S].
[11]
GJB377A/Z-1994.感度试验用数理统计方法[S].GJB377A/Z-1994.Using the method of mathematical statistics, sensitivity test[S].
[12]
GJB344-1987.钝感电起爆器通用设计规范[S].GJB344-1987.General design specification for insensitive electric-initiators[S].
[13]
Zhang K L.A MEMS-based solid propellant microthruster with Au/Ti igniter[J].Sensors and Actuators, 2005, (122): 113-123.
[14]
Robinson.H.Charles.Materials, fabrication, and assembly technologies for advanced MEMS-based safety and arming mechanisms for projectile munitions[C]∥US Army RDECOM ARDEC Perspective, 2006.
