赵瑜, 鲍福廷, 胡志伟, 等.AP /HTPB 复合推进剂燃烧的详细化学动力学建模[J].固体火箭技术, 2012,35(3): 311-318.ZHAO Yu, BAO Fu-ting, HU Zhi-wei, et al.A combustion model for AP /HTPB composite propellant using detailed chemical kinetics[J].Journal of Solid Rocket Technology, 2012,35(3): 311-318.
Bizot A.Numerical simulations of heterogeneous AP/HTPB propellant combustion with aluminium[R], AIAA 2006-5096,2006.
[6]
陆春义.底排装置强非稳态燃烧特性研究[D].南京: 南京理工大学,2009.LU Chun-yi.Study on characteristics of unstable combustion of base bleedunit[D].Nanjing: Nanjing University of Science and Technology,2009.
[7]
Jeppson M B, Beckstead M W, Jing Q.A kinetic model for the premixed combustion of a fine AP/HTPB composite propellant[R], AIAA-A9816318,1998.
[8]
Tanaka M, Yokosuka, Beckstead M W.A Three phase combustion model of ammonium perchlorate[R], AIAA 96-2888,1996.
[9]
Goncalres R F B, Silva R P, Rocco J A, et al.Thermal Decomposition kinetics of aged solid propellant based on ammonium perchlorate AP/HTPB binder[R], AIAA 2008-4969,2008.
[10]
Lee I.Thermal response of AP and aluminized AP/HTPB- based propellants with varing composition[R], AIAA 99-2496,1999.
[11]
周彦煌, 张领科, 陆春义, 等.一种两相流点火模型及数值模拟[J].兵工学报, 2010,31(4): 414-418.ZHOU Yan-huang, ZHANG Ling-ke, LU Chun-yi, et al.A two-phase flow model and numerical simulation of ignition[J].Acta Armamentarii, 2010,31(4): 414-418.
[12]
张领科, 周彦煌, 赵威.膛内高温燃气对底排药剂点火过程影响的数值分析[J].南京理工大学学报,2010,34(6):770-774.ZHANG Ling-ke, ZHOU Yan-huang, ZHAO Wei.Numerical analysis on effect of high temperature gas in bore on ignition process of base bleed propellant[J].Chinese Journal of Nanjing University of Science and Technology(Natural Science), 2010,34(6): 770-774.
[13]
张领科, 周彦煌, 余永刚.底排点火具射流特性对点火延迟时间的影响[J].弹道学报, 2010,22(3): 8-11.ZHANG Ling-ke, ZHOU Yan-huang, YU Yong-gang.Effect of jet of base bleed igniter on ignition delay time[J].Chinese Journal of Ballistics, 2010,22(3): 8-11.
刘子如.含能材料热分析[M].北京:国防工业出版社,2008.LIU Zi-ru.Thermal Analyses for Energetic Materials[M].Beijing: National Defence Industry Press, 2008.
[17]
孙翠娜, 乔小晶, 张同来, 等.用差示扫描量热法测定含能化合物的比热容[J].含能材料, 2006,14(3):181-183.SUN Cui-na, QIAO Xiao-jing, ZHANG Tong-lai, et al.Determination of specific heat capacity of energetic compounds by DSC[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2001,24(2): 1-5.
[18]
陈珣, 傅培舫, 周怀春.煤焦比热容的模型与DSC实验研究[J].工程热物理学报,2008,31(1): 169-172.CHEN Xun, FU Pei-fang, ZHOU Huai-chun.Experimental study of specific heat models of coal-chars by applying DSC[J].Journal of Engineering Thermophysics, 2008,31(1): 169-172.
刘建勋, 刘永, 张小娟, 等.纳米NiO /CNTs复合粒子的制备及其对AP和AP /HTPB热分解的影响[J].推进技术,2008,29(1): 119-123.LIU Jian-xun, ZHANG Yong, ZHANG Xiao-juan, et al.Preparation of NiO/CNTs composites and their effects on the thermal decomposition of AP and AP/HTPB[J].Chinese Journal of Propulsion Technology, 2008,29(1): 119-123.
[21]
ZHU Yan-li, HUANG Hao, REN Hui, et al.Kinetics of thermal decomposition of ammonium perchlorate by TG/DSC-MS-FTIR[J].International Journal of Energetic Materials, 2014,32: 16-26.
[22]
CAI Wei-dong, THAKRE Piyush, YANG Vigor.A model of AP/HTPB composite propellant combustion in rocket-motor environments[J].Combustion Science and Technology, 2008,180:2143-2169.
