全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

竖直轴潮流发电水轮机调距机构设计

DOI: doi:10.3969/j.issn.1006-7043.2011.09.006

Keywords: 潮流能, 竖轴水轮机, 叶片调距机构, 运动学分析, 运动仿真??

Full-Text   Cite this paper   Add to My Lib

Abstract:

为了进行竖直轴潮流发电水轮机的水动力性能模型试验研究,需重点设计该水轮机的叶片调距机构. 在分析现有叶片控制机构的设计思路基础上,提出了一种双偏心机构与双曲柄六杆机构相结合的新型竖直轴水轮机调距机构.对该机构进行了运动学分析,应用相关软件对其进行运动仿真,验证了该方案设计的合理性,并分别给出了工作原理和装配图.所建立的运动学模型对进一步开展竖轴水轮机的相关模型试验研究具有一定的参考意义.

References

[1]  陈晗.弹簧控角竖轴直叶水轮机水动力性能研究[D]. 哈尔滨:哈尔滨工程大学, 2003:1-3. ?CHEN Han. Hydrodynamic performance research on spring-control vertical-axis variable-pitch turbine [D]. Harbin: Harbin Engineering University, 2003:1-3.?
[2]  张亮,汪鲁兵,李凤来,等. 竖轴变攻角潮流发电水轮机性能预报流管模型研究[J].哈尔滨工程大学学报,2004,25(3):261-262.? ZHANG Liang, WANG Lubing, LI Fenglai, et al. Stream-tube modals for performance prediction of vertical-axis variable-pitch turbine for tidal current energy conversion[J]. Journal of Harbin Engineering University, 2004, 25(3):261-262.?
[3]  季剑远. 可控偏角竖轴水轮机性能试验研究[D]. 哈尔滨:哈尔滨工程大学,2008:3-4.? JI Jianyuan. The experimental performance research on controlled vertical-axis variable-pitch turbine [D]. Harbin: Harbin Engineering University, 2008:3-4.?
[4]  HWANG I S, LEE Y H, KIM S J. Optimization of cycloidal water turbine and the performance improvement by individual blade control[J]. Applied Energy, 2009 (86) : 1532-1540.?
[5]  ALESSANDRO S, MATTHEW C. Development of a hydraulic control mechanism for cyclic pitch marine current turbines[J]. Renewable Energy, 2007(32): 662-679.?
[6]  汪鲁兵. 竖轴潮流水轮机水动力性能理论与实验研究[D]. 哈尔滨:哈尔滨工程大学,2005:26-29.? WANG Lubing. Theoretical and experimental study on hydrodynamic performances of vertical-axis tidal turbine [D]. Harbin: Harbin Engineering University, 2005:26-29.?
[7]  汪鲁兵.一种新型变攻角直叶水轮机水动力性能优化研究[D].哈尔滨:哈尔滨工程大学, 2003:2-3.? WANG Lubing. On study of an optimal method for hydrodynamic performance of a new type of vertical-axis turbine[D].Harbin:Harbin Engineering University, 2003:2-3.?
[8]  施科益,杨世锡. 一种新型摆线推进器控制系统设计[J].机电工程, 2008,25(10):91-92.? SHI Keyi, YANG Shixi. Design of a new cycloidal propeller′control system[J]. Mechanical Engineering, 2008,25(10):91-92.?
[9]  王振邦. 摆线推进器机构的研究――VSP 机构分析[J]. 应用科技,1985(1):35-43.? WANG Zhenbang. Research on the mechanism of cycloidal propeller-VSP mechanism analysis[J]. Applied Science and Technology, 1985(1):35-43.?
[10]  鹿素江. 竖轴推进器两种控制机构叶片角的探讨[J]. 中国造船,1985(4):16.? LU Sujiang, Blade angle analysis of the two control mechanisms in vertical-axis propeller[J].China Shipbuilding, 1985(4):16.?
[11]  朱典明. 摆线推进器的理论计算方法[J].哈尔滨船舶工程学院学报, 1982(1): 1-2. ?ZHU Dianming. Theoretical computational method for cycloidal propellers [J]. Journal of Harbin Ship Engineering College, 1982(1): 1-2.?
[12]  周行健. 平旋推进器桨叶驱动机构的研究[J]. 机电设备, 2006(5):20-24. ?ZHOU Xingjian. The research on blade-driven mechanism of Voith-Schneider propeller [J]. Mechanical and Electrical Equipment, 2006(5):20-24.?

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133