DUAN Zhongdong, ZHOU Daocheng. Calibration of LRFD format for steel jacket offshore platforms in China offshore area[J]. China Ocean Engineering, 2006,12(1):1-14.？
梁富浩, 闫祥安, 郑炜. 导管架夹桩器受力分析及液压缸数选择[J]. 海洋工程, 2007,25(1):82-87.？ LIANG Fuhao, YAN Xiangan, ZHENG Wei. Mechanical analysis of jacket pile gripper and choice of the number of hydraulic pressure vats[J]. The Ocean Engineering, 2007,25(1):82-87.？
[4]
刘宗昌, 李文学, 高占勇,等.钢的退火软化机理[J]. 包头钢铁学院学报, 1999,17(3):178-181.？ LIU Zongchang, LI Wenxue, GAO Zhanyong,et al.Mechanism of annealing softening of the steels[J]. Journal of Baotou University of Iron and Steel Technology, 1999,17(3):178-181.？
[5]
刘宗昌, 王开国, 邵淑艳,等.X45NiCrMo4钢材的软化退火[J]. 特殊钢， 2001,22(3):17-19.？ LIU Zongchang, WANG Kaiguo, SHAO Shuyan,et al.Softening annealing treatment of finished products of steel X45NiCrMo4[J]. Special Steel, 2001,22(3):17-19.？
[6]
张琳, 倪慧锋. 船用高强钢DH36垂直自动气电焊的试验与研究[J]. 电焊机, 2004,34(2):16-19.？ ZHANG Lin, NI Huifeng. Test and research of EGW for high-strength hull structural steel DH36[J]. Electric Welding Machine, 2004,34(2):16-19.？
[7]
MATTHEW A D, LORNA J G. Optimization of cylindrical shells with compliant cores[J]. International Journal of Solids and Structures, 2007, 44（3）: 1145-1160.？
[8]
李铀, 李锶, 白世伟. 理想弹塑性厚壁圆筒弹塑性应力场再研究[J]. 岩石力学与工程学报, 2002,21(6):897-899.？ LI You, LI Si,BAI Shiwei. Reresearch on the stress field of perfect elastic-plastic thick-wall tube[J]. Chinese Journal of Rock Mechanics and Engineering, 2002,21(6):897-899.
[9]
侯金林. 导管架调平与灌浆系统[J]. 中国海上油气(工程), 2000,12(4):20-22.？ HOU Jinlin. Jacket adjusting plane and grouting system[J]. China Offshore Oil and Gas, 2000,12(4):20-22.？
[10]
朱绍华. 文昌油田深水导管架安装技术[J]. 中国海上油气(工程), 2003,15(1):12-14.？ ZHU Shaohua. Deep water jacket of Wenchang oilfield installation technology[J]. China Offshore Oil and Gas Engineering, 2003,15(1):12-14.？
[11]
于建农, 谭礼？, 刘润，等. 接桩卡具的设计及受力分析[J]. 石油工程建设， 2003,29(5):40-43.？ YU Jiannong, TAN Lichun, LIU Run, et al. Design and mechanical analysis of clamping apparatus used for pipe connection[J]. Petroleum Engineering Construction, 2003,29(5):40-43.？
[12]
孙志娟, 孟庆鑫, 周到. 海洋石油平台水下夹桩器本体结构分析[J]. 石油矿场机械, 2007, 36(1):36-38.？ SUN Zhijuan, MENG Qingxin, ZHOU Dao. Structure analysis of the frame in underwater skirt pile gripper of offshore oil platform[J]. Oil Field Equipment, 2007, 36(1):36-38.？
