姚熊亮，孙士丽，陈玉.高频动载轴承内油膜压力特性[J].机械工程学报， 2010，46(17)：93-99.？ YAO Xiongliang, SUN Shili, CHEN Yu. The pressure behavior of oil film in bearing subjected to high-frequency dynamic load[J].Journal of Mechanical Engineering, 2010,46(17):93-99.？
[2]
邓玫，孙军，符永红，等.计及轴受载变形的粗糙表面轴承热弹性流体动力润滑分析[J]. 机械工程学报，2010，46(15)：95-101.？ DENG Mei, SUN Jun, FU Yonghong,et al.Thermoelastohydrodynamic lubrication analysis of bearing considering shaft deformation and surface roughness[J]. Journal of Mechanical Engineering, 2010,46(15):95-101.？
[3]
姚熊亮，张成，孙士丽.考虑可压缩性及惯性力的油膜力研究[J]. 中国舰船研究， 2010，5(6)33-40.？ YAO Xiongliang, ZHANG Cheng, SUN Shili. Analysis of oil film force considering compressibility and inertial force[J]. Chinese Journal of Ship Research, 2010,5(6):33 -40.？
[4]
全永昕. 工程摩擦学[M]. 杭州：浙江大学出版社，1994：222-250.？ QUAN Yongxin. Engineering tribology[M]. Hangzhou: Zhejiang University Press, 1994: 222-250.？
[5]
王兆伍，杨家富，徐尚贤.流体润滑轴承静动态特性的有限分析法[J].南京林业大学学报，1996，20(4)：32-42. WANG Zhaowu, YANG Jiafu, XU Shangxian. The finite analytic method on static and dynamic performance of journal bearings[J]. Journal of Nanjing Forestry University,1996,20(4):32-42.？
[6]
高创宽，齐秀梅.雷诺方程数值解中的几个问题[J].太原重型机械学院学报， 1993，18(6)：30-41.？ GAO Chuangkuan, QI Xiumei. Several problems in the numerial solution to Reynolds′ equation[J]. Journal of Taiyuan University of Science and Technology, 1993,18(6):30-41.？
[7]
张直明. 滑动轴承的流体动力润滑理论[M]. 北京：高等教育出版社， 1986：1-5，34-46，65-72.？ ZHANG Zhiming. Hydrodynamic lubrication theory of sliding bearing[M]. Beijing: Higher Education Press, 1986: 1-5, 34-46, 65-72.？
[8]
黄民毅. 液体动压滑动轴承设计的数值计算[J]. 四川工业学院学报， 1998，17(3)：37-41.？ HUANG Minyi.Numerical calculation in the design of sliding bearings with liquid dynamic lubrication[J].Sichuan University of Science and Technology, 1998,17(3):37-41.？
[9]
王宁. 基于MATLAB的滑动轴承压力分布的数值计算[D]. 大连：大连理工大学， 2006:1-3.？ WANG Ning. Numerical Calculation to the pressure distribution of journal bearing based on the Matlab[D].Dalian: Dalian University of Technology, 2006:1-3.？
[10]
机械设计手册委员会.机械设计手册(第三卷) [M].北京：机械工业出版社，2004：21-25.？ Standard Handbook of Machine Design Committee. Standard handbook of machine design-Ⅲ[M]. Beijing: China Machine Press, 2004: 21-25.
[11]
唐倩，方志勇，朱才朝，等.滑动轴承油膜压力及合金层应力分布[J].中南大学学报， 2008，39(4)：776-779.？ TANG Qian, FANG Zhiyong, ZHU Caichao,et al. Oil film pressure and stress distribution in alloy layer of journal bearing[J]. J Cent South Univ, 2008,39(4):776-779.？
[12]
曹树谦，丁千，陈予恕，等.具有滑动轴承的稳态转子系统有限元建模分析[J].汽轮机技术， 1999，41(6)：347-350.？ CAO Shuqian,DING Qian,CHEN Yushu,et al.Analysis on modeling steady rotor system with sliding bearings by using FEM[J].Turbine Technology, 1999,41(6):347-350.？
SUN Jun, GUI Changlin. Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformation[J]. Tribology International, 2004,37:841-848.？
[15]
孙军，王震华，桂长林．计入曲轴受载变形的粗糙表面曲轴轴承弹性流体动力润滑分析[J]．机械工程学报，2009, 45(1)：135-140.？ SUN Jun,WANG Zhenhua, GUI Changlin. Elastohydr-odynamic lubrication analysis of crankshaft bearing considering crankshaft deformation under load and roughness surface[J]. Journal of Mechanical Engineering, 2009,45(1):135-140.？
[16]
SUN Jun, GUI Changlin. Effect of lubrication status of bearing on crankshaft strength[J]. Journal of Tribology, Transactions of the ASME, 2007,129:887-894.？
[17]
柳江林，孙军，桂长林，等．轴颈倾斜轴承的热流体动力润滑分析[J]. 润滑与密封， 2007 (9)：60-63, 32.？ LIU Jianglin,SUN Jun,GUI Changlin,et al.Thermohydr-odynamic lubrication analyses of misaligned journal bearing[J].Lubrication Engineering, 2007 (9):60-63,32.
