ROHATGI A, VECCHIO K S, GRAY G T. The influence of stacking fault energy on the mechanical behavior of Cu-Al alloys: deformation twinning, work hardening and dynamic recovery [J]. Metal Mater Trans A, 2001, 32(1): 135-145.？
[2]
SUULLIVAN J L, WONG L F. Wear of aluminum bronze on steel under condition of boundary lubrication [J]. Tribol Int, 1985, 18(5): 275-281.？
[3]
WERT J J. The influence of stacking fault energy and adhesion on the wear of copper and aluminum bronze [J]. Wear, 1988, 123(2): 171-192.？
[4]
LI Yuanyuan, ZHANG Datong, LEO N T, et al. Diffusion couple between high strength wear-resising aluminum bronze and machining tools materials[J]. Trans Nonferrous Metal Soc China, 1999, 9(1): 6-9.？
[5]
LI W S, WANG Z P, LU Y, et al. Friction and wearing behaviors of a novel aluminum bronze material for stainless steel utensils[J]. Wear, 2006, 259(2): 155-163.
[6]
路阳, 李文生, 王智平. 新型模具Cu-14Al-X合金材料的研制[J]. 热加工工艺, 2002（3）: 45-47. ？LU Yang, LI Wensheng, WANG Zhiping. New developed aluminium bronze alloy for die[J]. Hot Working Technology， 2002（3）: 45-47.？
[7]
路阳, 王智平, 李文生, 等. 热处理对铜合金模具材料组织和硬度的影响[J]. 金属热处理, 2002（3）: 40-42. ？LU Yang, WANG Zhiping, LI Wensheng，et al. Effects of heat treatment process on microstructure and hardness of copper alloy die[J]. Heat Treatment of Metals, 2002(3): 40-42.？
[8]
路阳，李亚斐，杨效田，等. 高铝铜合金粉末激光熔覆层的摩擦磨损性能[J]. 兰州理工大学学报，2009, 35(2): 9-12. ？LU Yang, LI Yafei, YANG Xiaotian，et al. Friction and wear properties of laser melt-cladding with high-aluminum bronze powders[J]. Journal of Lanzhou University of Technology, 2009, 35(2): 9-12.？
[9]
李文生，路阳，杨效田，等. 等离子制备高铝青铜合金粉体涂层的组织及性能研究[J]. 兰州理工大学学报，2009, 35(3): 9-12. ？LI Wensheng, LUYang,YANG Xiaotian, et al. Structure and property of high aluminum bronze coating sprayed with plasma melt-coating[J]. Journal of Lanzhou University of Technology, 2009, 35(3): 9-12.？
[10]
陆欢，王海军，郭永明，等. 超音速等离子喷涂参数对粒子速度温度的影响[J].中国表面工程,2008, 21(1): 19-23. ？LU Huan，WANG Haijun，GUO Yongming，et al. The influence of supersonic plasma spray parameters on flying particles velocity and temperature[J]. China Surface Engeering, 2008, 21(1): 19-23.？
[11]
张红霞，赵红利，夏建元，等. 感应重熔Ni60/WC涂层的界面组织与耐磨性研究[J]. 特种铸造及有色合金, 2011, 31(2): 107-109. ？ZHANG Hongxia, ZHAO Hongli, XIA Jianyuan, et al. Microstructure and interface morphology as well as wear behavior of induction remelting Ni60/WC composite coating[J]. Special Casting & Nonferrous Alloys, 2011, 31(2): 107-109.？
[12]
谢兆钱，王海军，郭永明，等. 超音速等离子喷涂超细 WC-12Co涂层的性能[J].中国表面工程，2010, 23(5): 54-58. ？XIE Zhaoqian, WANG Haijun, GUO Yongming, et al. Performance of ultrafine WC-12Co coatings sprayed by supersonic plasma spraying[J].China Surface Engeering, 2010, 23(5): 54-58.？
[13]
马伯江, 赵程, 侯俊英. 45钢表面真空炉中和高频感应熔覆Ni-Cr合金的研究[J]. 金属热处理, 2006, 31(7): 21, 44, 54, 64. ？MA Bojiang, ZHAO Cheng, HOU Junying. Microstructure and interface morphology as well as wear behavior of induction remelting Ni60/WC composite coating[J]. Heat Treatment of Metals, 2006, 31(7): 21, 44, 54, 64.？
[14]
PANTLEON K, KESSLER O, HOFFANN F, et al. Induction surface hardening of hard coated steels [J]. Surface and Coatings Technology, 1999(120/121): 495-501.？
[15]
韩桂泉, 周品, 胡喜兰, 等. 感应熔覆镍基合金粉末涂层研究[J]. 润滑与密封, 2006(1): 75-77,80. ？HAN Guiquan, ZHOU Pin, HU Xilan, et al. Study on nickel-matrix alloy coating fabricated by rapid induction heating[J]. Lubrication Engineering, 2006(1): 75-77,80. ？
