洪肇斌，杨兆军，张学成，等. 基于齿面发生线的弧齿锥齿轮铣削加工仿真分析\[J\]. 吉林大学学报：工学版，2013， 43(2)： 334-339.？ HONG Zhaobin, YANG Zhaojun, ZHANG Xuecheng, et al. Milling simulation analysis of spiral bevel gear based on to？oth generating line\[J\]. Journal of Jilin University：Engineering and Technology Edition, 2013, 43(2): 334-339.？ [2]FAN Q. Computerized modeling and simulation of spiral bevel and hypoid gears manufactured by Gleason face hobbing process\[J\]. ASME J Mech Des, 2006, 128(6): 1315-1327.？ [3]SENTOKU H. Load distribution and tooth root stress of bevel gears\[J\]. JSME International Journal Series C, 1999, 42(2): 404-409.？ [4]SIMON V V. Machine？tool settings to reduce the sensitivity of spiral bevel gears to tooth errors and misalignments\[J\]. ASME J Mech Des, 2008, 130(8): 1-10. [5]LITVIN F L, WANG A G, HANDSCHUH R F. Computerized design and analysis of face？milled, uniform tooth height spiral bevel gear drives\[J\]. Journal of Mechanical Design, 1996, 118(4): 573-579.？ [6]曹雪梅，方宗德，张金良，等. 弧齿锥齿轮的齿面主动设计\[J\]. 机械工程学报， 2007， 43( 8)： 155-158，164.？ CAO Xuemei, FANG Zongde, ZHANG Jinliang, et al. Function？oriented active tooth surface design of spiral bevel gears\[J\]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 155？158, 164. [7]王裕清，武良臣. 弧齿锥齿轮接触区理论与切削过程仿真\[M\]. 北京：煤炭工业出版社， 2004： 6. [8]ZHANG X C, WANG X, YU L J, et al. Study on the generation of spiral bevel gears with spherical involute tooth profile by the tracing line\[J\]. Journal of Mechanical Engineering Science, 2012, 226(C4): 1097 -110 ？ [9]庞兴华. 圆锥弧齿轮几何建模的研究\[J\]. 南阳理工学院学报，2010, 2(6): 40-42.？ PANG Xinghua. Analysis in the modeling of spiral bevel gear\[J\]. Journal of Nanyang Institute of Technology, 2010, 2(6): 40-42.？ [10]章华，杨文珍，于世光，等. 基于参数化的弧齿锥齿轮建模仿真与加工\[J\]. 浙江理工大学学报, 2012, 29(2): 220？224, 253.？ZHANG Hua, YANG Wenzhen, YU Shiguang, et al. Modeling simulation and processing of skew bevel gear based on parametric design\[J\]. Journal of Zhejiang Sci-Tech University, 2012, 29(2): 220-224, 253.？ [11]DACCAK M J, ANGELES J. The modeling of bevel gears using the exact spherical involute\[J\]. J Mech Des, 1994,116(2): 364-368. [12]彭福华. 渐开线齿轮产形线切齿法\[M\]. 长春：吉林科学技术出版社， 2008: 24-32. [13]谷凤民,周亮,段建中，等.弧齿锥齿轮的一种新型精确设计方法\[J\].机械设计与制造, 2008 (12): 12-13.
