KOBAYASHI K. Numerical simulaton of cavitating flow in mixed flow pump with closed type impeller\[C\]//Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting.Colorado, USA,2009.? [2]MUGGLI F, HOLBEIN P. CFD calculation of a mixed flow pump characteristic from shutoff to maximum flow\[J\]. Transactions of the ASME, 2002,124:798-802. [3]YAMADE Y, KATO C.Large eddy simulation of internal flow of a mixed?flow pump \[C\]//Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting.Colorado, USA,2009.? [4]MAJIDI K.Numerical study of unsteady flow in a centrifugal pump\[J\].ASME Journal of Turbomachinery,2005,127(2):363-371. [5]MOREN N ,PAVLOV S . Active ruder control\[C\]//International Conference on Waterjet PropulsionⅤ. RINA.London,UK,2008. [6]BULTEN N , VERBEEK R. Off?design behaviour of waterjets\[C\]//International Conference on Waterjet PropulsionⅤ. RINA.London,UK,2008.? [7]SEIL G J . the Effect of the shaft, shaft sotation and scale on the flow in waterjet inlets\[C\]//International Conference on Waterjet PropulsionⅢ. RINA, Sweden,2001. [8]VERBEEK R,BULTEN N W H.Interpretation of model scale test results with aid of CFD calculations\[C\] //International Conference on Waterjet PropulsionⅢ. Stockholm, Sweden,2001. 【9]ALLISON J L,BECNEL A J ,PURNELL J G.Research in waterjet inlet, hull, and jet interactions\[C\]//International Conference on Waterjet PropulsionⅢ. Stockholm, Sweden,2001. [10】靳栓宝,王永生,丁江明. 混流式喷水推进泵三元设计及数值试验\[J\]. 哈尔滨工程大学学报,2012, 3(10):1223-1227. ? JIN Shuanbao, WANG Yongsheng,DING Jiangming. Three?dimensional design of mixed?flow waterjet with CFD\[J\]. Journal of Harbin Engineering University, 2012, 3(10):1223-1227. 【11]ESPANOLES L G. A best practice guidelines for marine applications of computational fluid dynamics\[R\]. (s.l.):WS Atkins Consultants and Members of the NSC, MARNET-CFD Thernatic Network,2002.? [12]王福军,张玲,黎耀军. 轴流式水泵非定常湍流数值模拟的若干关键问题\[J\]. 机械工程学报, 2008, 44(8): 73-77.? WANG Fujun, ZHANG Ling, LI Yaojun. Some key issues of unsteady turbulent numerical simulation\[J\]. Chinese Journal of Mechanical Engineering, 2008, 44(8):73-77.