茅承觉,叶定海,张照煌.全断面岩石掘进机概论――全断面岩石掘进机技术讲座之一[J].建筑机械, 1998, 22(9):30-34. MAO Chengjue, YE Dinghai, ZHANG Zhaohuang. TBM introduction[J]. Construction Machinery, 1998, 22(9):30-34.
[2]
水利部科技推广中心.全断面岩石掘进机(TBM)[M].北京:石油工业出版社, 2005:87-90. Promotion Center for Science & Technology Achievements of Ministry of Water Resources. Full face rock tunnel boring machine (TBM)[M]. Beijing:Petroleum Industry Press, 2005:87-90.
[3]
ROSTAMI J, OZDEMIR L, NIKON B. Comparison between CSM and NTH hard rock TBM performance prediction models[C]//Proceedings of Annual Technical Meeting of the Institute of Shaft Drilling Technology. ISDT, Las Vedas NV, 1996.
[4]
SNOWDON R A, RYLEY M D. Single and multiple pass disc cutting in shape granite[J]. Tunnel & Tunneling, 1983, 15(11):15-19.
[5]
OZDEMIR L, MILLER R. Cutter performance study for deep based missile egress excavation[R]. Golden, Colorado, Earth Mechanics Institute Colorado School of Mines, 1986:105-132.
[6]
HUO Junzhou, SUN Wei, CHEN Jin, et al. Disc cutters plane layout design of the full-face rock tunnel boring machine (TBM) based on different layout patterns[J]. Computers & Industrial Engineering, 2011, 61(4):1209-1225.
[7]
霍军周,孙伟,郭莉,等.多滚刀顺次作用下岩石破碎模拟及刀间距分析[J].哈尔滨工程大学学报, 2012, 33(1):96-99. HUO Junzhou, SUN Wei, GUO Li, et al. Numerical simulation of the rock fracture process induced by multi-disc-cutters and cutter spacing design[J]. Journal of Harbin Engineering University, 2012, 33(1):96-99.
[8]
暨智勇.基于UDEC仿真的滚刀最优刀间距确定方法[J].铁道建筑技术, 2012(10):1-5. JI Zhiyong. Determination method of optimum cutter spacing of disc cutter based UDEC simulation[J]. Railway Construction Technology, 2012(10):1-5.
[9]
吴玉厚,张健男,王贺,等.基于ABAQUS的岩石滚刀实验机最优刀间距分析[J].沈阳建筑大学学报:自然科学版, 2012, 28(5):927-931. WU Yuhou, ZHANG Jiannan, WANG He, et al. Optimal analysis for cutter space of linear cutter machine based on ABAQUS[J]. Journal of Shenyang Jianzhu University:Natural Science, 2012, 28(5):927-931.
[10]
赵金华,费学婷,袁国,等.国产与进口TBM滚刀刀圈显微组织与磨损机理的对比分析[J].矿山机械, 2012, 40(8):120-124. ZHAO Jinhua, FEI Xueting, YUAN Guo, et al. Comparison and analysis of domestic and imported TBM cutter ring in microstructure and wear mechanism[J]. Mining & Processing Equipment, 2012, 40(8):120-124.
[11]
谭青,王志富,夏毅敏,等.基于组件振型综合法的TBM盘形滚刀模态分析[J].矿山机械, 2010, 38(24):34-37. TAN Qing, WANG Zhifu, XIA Yimin, et al. Modal analysis of TBM disc cutter based on component mode synthesis[J]. Mining & Processing Equipment, 2010, 38(24):34-37.
[12]
ZHANG Kui, XIA Yimin, TAN Qing, et al. Establishment of TBM disc cutter dynamic model for vertical vibration[J]. Intelligent Robotics and Applications, 2009, 5928:374-382.
[13]
XIA Yimin, OUYANG Tao, ZHANG Xinming, et al. Mechanical model of breaking rock and force characteristic of disc cutter[J]. Journal of Central South University, 2012, 19(7):1846-1852.
[14]
霍军周,李涛,孙伟,等.一种滑动支撑的掘进机盘型单刃滚刀设计方法:CN, 103244138A[P]. 2013.HUO Junzhou, LI Tao, SUN Wei, et al. A kind of design method about single disc cutter based on sliding support:CN, 103244138A[P]. 2013.
[15]
罗继伟,罗天宇.滚动轴承分析计算与应用[M].北京:机械工业出版社, 2009:51. LUO Jiwei, LUO Tianyu. The analysis calculation and application of rolling bearing[M]. Beijing:Machine Industry Press, 2009:51.
