王为民, 王建录. 高效超临界汽轮机的研究与开发[J]. 动力工程, 2004, 24(5): 609-613. WANG Weimin, WANG Jianlu. Investigation and development of high efficiency ultracritical steam turbine[J]. Journal of Power Engineering, 2004, 24(5): 609-613.
[2]
沈邱农, 杨连海. 大型超超临界机组的自主化开发[J]. 热力透平, 2005, 34(3): 133-137. SHEN Qiunong, YANG Lianhai. Self-development of large ultra-supercritical steam turbine[J]. Thermal Turbine, 2005, 34(3): 133-137.
[3]
范华, 杨功显. 超临界与超超临界汽轮机组用材[J]. 东方电气评论, 2005, 19(2): 90-97, 105. FAN Hua, YANG Gongxian. Materials used for supercritical and ultra supercritical steam turbine unit[J]. Dongfang Electric Review, 2005, 19(2): 90-97, 105.
[4]
赵成志, 魏双胜, 武桂香, 等. ZG1Cr10MoWVNbN耐热钢的断裂特征与强化机制[J]. 材料工程, 2008(3): 1-4. ZHAO Chengzhi, WEI Shuangsheng, WU Guixiang, et al. Fracture characteristic and strengthening mechanism of heat resistant steel ZG1Cr10MoWVNbN[J]. Journal of Materials Engineering, 2008(3): 1-4.
[5]
宛农, 张家福, 周静彬, 等. Mod 9Cr-1Mo耐热钢析出相的热力学计算及应用[J]. 特殊钢, 1999, 20(2): 20-23. WAN Nong, Zhang Jiafu, ZHOU Jingbin, et al. Thermodynamic calculation and application of precipitate phases in Mod 9Cr-1Mo heat resistant steel[J]. Special Steel, 1999, 20(2): 20-23.
[6]
于在松, 刘江南, 王正品, 等. T91钢服役过程中碳化物的熟化分析[J]. 铸造技术, 2007, 28(5): 635-638. YU Zaisong, LIU Jiangnan, WANG Zhengpin, et al. Analysis on ripening of carbides during service of T91steel[J]. Foundry Technology, 2007, 28(5): 635-638.
[7]
杨钢, 郭永华, 刘新权, 等. 595℃长期时效对M152马氏体耐热钢力学性能的影响[J]. 钢铁, 2010, 45(7): 66-70. YANG Gang, GUO Yonghua, LIU Xinquan, et al. Effect of long-term aging at 595℃ on mechanical properties of M152 martensitic heat-resistant steel[J]. Iron and Steel, 2010, 45(7): 66-70.
[8]
ANGELIU T, HALL E L, EARSEN M, et al. The long-term aging embrittlement of Fe-12Cr steels below 773K[J]. Metallurgical and Materials Transactions A, 2003, 34(4): 927-934.
[9]
雍岐龙. 钢铁材料中的第二相[M]. 北京: 冶金工业出版社, 2006: 10-20.
[10]
齐俊杰, 黄运华, 张跃. 微合金化钢[M]. 北京: 冶金工业出版社, 2006: 6-23.
[11]
李智超. 先共析铁素体对粒状贝氏体性能的影响[J]. 热加工工艺, 1991 (2): 3-5. LI Zhichao. The effect of hypoeutectic ferrite on the properties of granular bainite[J]. Hot Working Technology, 1991 (2): 3-5.
[12]
ANGELIU T, HALL E L, EARSEN M, et al. The long-term aging embrittlement of Fe212Cr steels below 773K[J]. Metallurgical and Materials Transactions, 2003, 34A(4): 927.
