LITVIN F L, FUENTES-AZNAR A, et al. Noncircular gears design and generation[M]. New York:Cambridge University Press, 2009:9-11.
[2]
沈谦. 渐开线锥形齿轮变速装置的设计原理[J]. 航空动力学报, 1993, 8(1):75-78. SHEN Qian.Design principle of change-speed involute conical gear train[J]. Journal of Aerospace Power, 1993, 8(1):75-78.
[3]
周长秀, 沈谦. 渐开线锥形齿轮变速装置的传动与设计[J]. 机械制造, 1989(9):9-10. ZHOU Changxiu, SHEN Qian. Design and transmission of change-speed involute conical gear train[J]. Journal of Aerospace Power Machinery, 1989(9):9-10.
[4]
LITVIN F L. Gear geometry and applied theory[M]. Prentice-Hall, 1994:105-109.
[5]
杨世平. 基于VB的非圆齿轮CAD/CAM系统研究与开发[J]. 机械科学与技术, 2008, 27(8):1056-1062. YANG Shiping. Development of a non-circular gear CAD/CAM system using VB[J]. Mechanical Science and Technology for Aerospace Engineering, 2008, 27(8):1056-1062.
[6]
陈作庆, 胡松年, 翟春香, 等. 非圆行星齿轮液压马达的结构分析与研究[J]. 机床与液压, 2010, 38(23):45-47.CHEN Zuoqing, HU Songnian, ZHAI Chunxiang, et al. The structural analysis and research of the non-circular planetary gear hydraulic motor[J]. Machine Tool & Hydraulics, 2010, 38(23):45-47.
[7]
周利锋. 一种新型摆线齿轮减速器[D]. 北京:北京邮电大学, 2012:46-51. ZHOU Lifeng. Design of a novel cycloid gear reducer[D]. Beijing:Beijing University of Post and Telecommunications, 2012:46-51.
[8]
姜虹, 王小椿. 三周节变传动比限滑差速器设计与验[J]. 农业机械学报, 2007, 38(4):31-34. JIANG Hong, WANG Xiaochun. Research on design and working principles of three-pitch fluctuating gear ratio limited-slip differential[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(4):31-34.
[9]
马延会. 变传动比限滑差速器的齿轮设计[D].武汉:武汉理工大学, 2007:7-16. MA Yanhui. The design of gears of variable ratio differential of slip resistance[D]. Wuhan:Wuhan University of Technology, 2007:7-16.
[10]
孙良, 赵匀, 姚佳明, 等. 非匀速空间行星轮系宽窄行分插机构分析与优化[J]. 农业机械学报, 2012, 43(10):41-71. SUN Liang, ZHAO Yun, YAO Jiaming, et al. Analysis and optimization of wide-narrow distance transplanting mechanism with spatial planetary gear train of variable speed transmission[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012, 43(10):41-71.
[11]
谭伟明, 梁燕飞, 安军, 等. 渐开线非圆齿轮的齿廓曲线数学模型[J]. 机械工程学报, 2002, 38(5):75-79. TAN Weiming, LIANG Yanfei, AN Jun, et al. Mathematical model for tooth profile of noncircular involute gears[J]. Chinese Journal of Mechanical Engineering, 2002, 38(5):75-79.
[12]
谭伟明, 胡赤兵. 非圆齿轮滚切最简数学模型及其图形仿真[J]. 机械工程学报, 2001, 37(5):26-29. TAN Weiming, HU Chibing. Concise mathematical model for hobbing noncircular gear and its graphic simulation[J]. Chinese Journal of Mechanical Engineering, 2001, 37(5):26-29.
[13]
李建刚, 吴序堂, 毛世民, 等. 非圆齿轮齿廓数值计算的研究[J]. 西安交通大学学报, 2005, 39(1):75-78. LI Jiangang, WU Xutang, MAO Shimin, et al. Numerical computation of tooth profile of noncircular gear[J]. Journal of Xian Jiaotong University, 2005, 39(1):75-78.
[14]
贺敬良, 李建刚, 王准, 等. 非圆齿轮的成形砂轮展成磨削原理[J]. 农业机械学报, 2007, 38(10):145-149. HE Jingliang, LI Jiangang, WANG Zhun, et al. Research on noncircular gear grinding method by using gear generator with form-grinding[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(10):145-149.
[15]
XIA Jiqiang, LIU Yuanyuan, GENG Chunming, et al. Non-circular bevel gear transmission with intersecting axes[J]. Journal of Mechanical Design, 2008, 130(5):1-6.
[16]
林超, 侯玉杰, 龚海, 等. 高阶变性椭圆锥齿轮传动模式设计与分析[J]. 机械工程学报, 2011, 47(13):131-139. LIN Chao, HOU Yujie, GONG Hai, et al. Design and analysis of transmission mode for high-order deformed elliptic bevel gears[J]. Chinese Journal of Mechanical Engineering, 2011, 47(13):131-139.
[17]
林超, 聂玲, 李莎莎, 等. 偏心-高阶椭圆锥齿轮副的强度计算方法[J]. 机械工程学报, 2013, 49(5):47-54. LIN Chao, NIE Ling, LI Shasha, et al. Strength calculation method of eccentric-high order elliptical bevel gear pair[J]. Chinese Journal of Mechanical Engineering, 2013, 49(5):47-54.
