MA Wenyu, WANG Baoyu, FU Lei, et al. Influence of process parameters on deep drawing of AA6111 aluminum alloy at elevated temperatures[J]. Journal of Central South University, 2015, 22(4):1167-1174.
[2]
SUN Guangyong, LI Guangyao, GONG Zhihui, et al. Radial basis functional model for multi-objective sheet metal forming optimization[J]. Engineering Optimization, 2011, 43(12):1351-1366.
[3]
杨卓懿, 庞永杰, 王建, 等. 响应面模型在艇型多目标优化中的应用[J]. 哈尔滨工程大学学报, 2011, 32(4):407-410. YANG Zhuoyi, PANG Yongjie, WANG Jian, et al. Application of a response surface model in multi-objective optimization for submersible shapes[J]. Journal of Harbin Engineering University, 2011, 32(4):407-410.
[4]
MOHAMED M S, FOSTER A D, LIN Jianguo, et al. Investigation of deformation and failure features in hot stamping of AA6082:Experimentation and modelling[J]. International Journal of Machine Tools and Manufacture, 2012, 53(1):27-38.
[5]
INGARAO G, DI LORENZO R, MICARI F. Analysis of stamping performances of dual phase steels:a multi-objective approach to reduce springback and thinning failure[J]. Materials & Design, 2009, 30(10):4421-4433.
[6]
MA Wenyu, WANG Baoyu, BIAN Jianhua, et al. A new damage constitutive model for thermal deformation of AA6111 sheet[J]. Metallurgical and Materials Transactions A, 2015, 46(6):2748-2757.
[7]
周平, 郭威, 张向奎, 等. 薄板成形切边回弹模拟的切边算法[J]. 农业机械学报, 2010, 41(5):222-226. ZHOU Ping, GUO Yi, ZHANG Xiangkui, et al. Trimming algorithm in trimming springback simulation of thin sheet forming[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010, 41(5):222-226.
[8]
DILIP KUMAR K, APPUKUTTAN K K, NEELAKANTHA V L, et al. Experimental determination of spring back and thinning effect of aluminum sheet metal during L-bending operation[J]. Materials & Design, 2014, 56:613-619.
马闻宇, 王宝雨, 周靖, 等. AA6082铝合金热变形损伤本构模型[J]. 中国有色金属学报, 2015, 25(3):595-601. MA Wenyu, WANG Baoyu, ZHOU Jing, et al. Damage constitutive model for thermal deformation of AA6082 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2015, 25(3):595-601.
[11]
刘兴华, 朱立群, 刘慧丛, 等. 铝合金微弧氧化放电火花对膜层粗糙度的影响[J]. 哈尔滨工程大学学报, 2014, 35(4):510-515. LIU Xinghua, ZHU Liqun, LIU Huicong, et al. Influence of micro-arc oxidation discharge sparks on the surface roughness of aluminum alloy coating[J]. Journal of Harbin Engineering University, 2014, 35(4):510-515.
[12]
ZHOU Jing, WANG Baoyu, LIN Jianguo, et al. Optimization of an aluminum alloy anti-collision side beam hot stamping process using a multi-objective genetic algorithm[J]. Archives of Civil and Mechanical Engineering, 2013, 13(3):401-411.
[13]
傅垒, 王宝雨, 孟庆磊, 等. 铝合金热冲压成形质量影响因素[J]. 中南大学学报:自然科学版, 2013, 44(3):936-941. FU Lei, WANG Baoyu, MENG Qinglei, et al. Factors affecting quality in hot stamping of aluminum alloy[J]. Journal of Central South University:Science and Technology, 2013, 44(3):936-941.
[14]
NGUYEN D T, YANG S H, JUNG D W, et al. A study on material modeling to predict spring-back in V-bending of AZ31 magnesium alloy sheet at various temperatures[J]. The International Journal of Advanced Manufacturing Technology, 2012, 62(5/6/7/8):551-562.
