刘晋春, 白基成, 郭永丰. 特种加工[M]. 第5版. 北京: 机械工业出版社, 2008: 2-78. LIU Jinchun, BAI Jicheng, GUO Yongfeng. Unconventional Machining[M]. 5th ed. Beijing: China Machine Press, 2008: 2-78.
[2]
D’URSO G, MACCARINI G, RAVASIO C. Process performance of micro-EDM drilling of stainless steel[J]. International Journal of Advanced Manufacturing Technology, 2014, 72(9): 1287-1298.
[3]
GUO Yongfeng, HOU Pengju, SHAO Dongxiang, et al. High-speed wire electrical discharge machining of insulating zirconia with a novel assisting electrode[J]. Materials and Manufacturing Processes, 2014, 29(5): 526-531.
[4]
LI J Z, SHEN F H, YU Z Y, et al. Influence of microstructure of alloy on the machining performance of micro EDM[J]. Surface & Coatings Technology, 2013, 228(S1): S460-S465.
[5]
KADIRVEL A, HARIHARAN P, GOWRI S. Experimental investigation on the electrode specific performance in micro-EDM of die-steel[J]. Materials and Manufacturing Processes, 2013, 28(4): 390-396.
[6]
BISSACCO G, TRISTO G, HANSEN H N, et al. Reliability of electrode wear compensation based on material removal per discharge in micro EDM milling[J]. CIRP Annals-Manufacturing Technology, 2013, 62(1): 179-182.
[7]
郭永丰, 白基成, 刘晋春. 电火花加工技术[M]. 第2版. 哈尔滨: 哈尔滨工业大学出版社, 2005: 1-179. GUO Yongfeng, BAI Jicheng, LIU Jinchun. Electrical Discharge Machining Technology[M]. 2nd ed. Harbin: Harbin Institute of Technology Press, 2005: 1-179.
[8]
KLOCKE F. Innovations and performance in wire EDM[C]//13th International Symposium for Electromaching. Bilbao, 2001: 39-63.
[9]
ZHOU Ming, HAN Fuzhu, WANG Yongxian, et al. Assessment of the dynamical properties in EDM process-detecting deterministic nonlinearity of EDM process[J]. The International Journal of Advanced Manufacturing Technology, 2012, 44(1/2): 91-99.
[10]
KOYANO T, KUNIEDA M. Micro EDM by stray-capacitance-coupled electric feeding[J]. Key Engineering Materials, 2012, 516(4): 245-250.
[11]
孙术发, 刘美爽, 狄士春. 脉冲参数主动匹配式micro-EDM脉冲电源[J]. 哈尔滨工业大学学报, 2014, 46(7): 118-122. SUN Shufa, LIU Meishuang, DI Shichun. Research of active pulse parameters matching micro-EDM pulse power supply[J]. Journal of Harbin Institute of Technology, 2014, 46(7): 118-122.
[12]
董强, 倪健, 刘云, 等. PCB的布线设计及抗干扰技术[J]. 舰船科学技术, 2006, 28(2): 57-59, 63. DONG Qiang, NI Jian, LIU Yun, et al. The wiring design of PCB and anti-jamming technology[J]. Ship Science and Technology, 2006, 28(2): 57-59, 63.
[13]
李文卓, 刘晋春, 赵万生, 等. 皮焦级超微能电火花加工电源技术研究[J]. 哈尔滨工业大学学报, 2009, 41(1): 197-203. LI Wenzhuo, LIU Jinchun, ZHAO Wansheng, et al. Pulse power supply with pico-joule energy for micro-EDM machining[J]. Journal of Harbin Institute of Technology, 2009, 41(1): 197-203.
CHEN Longhai, LIU Zhidong, QIU Mingbo, et al. Technical research of combined machining of TC4 titanium alloy by EDM induced controllable combustion and turning dressing[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(11): 2626-2634.
[16]
SUN Shufa, DI Shichun, LU Pengxiang, et al. Microstructure and properties of metamorphic layer formed on Mg-RE alloy in micro-EDM process[J]. Acta Metallurgica Sinica, 2013, 49(2): 251-256.
[17]
MAHARDIKA M, PRIHANDANA G S, MITSUI K. Precision machining by discharge pulse counting methods in micro-EDM processes[J]. Journal of Mechanical Science and Technology, 2012, 26(11): 3597-3603.
[18]
KIBRIA G, SARKAR B R, PRADHAN B B, et al. Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy[J]. The International Journal of Advanced Manufacturing Technology, 2010, 48(5-8): 557-570.
[19]
周明, 韩福柱. 电火花加工自适应控制系统的研究[J]. 电加工与模具, 2008(6): 16-20. ZHOU Ming, HAN Fuzhu. Study of adaptive control system for EDM process[J]. Electromachining & Mould, 2008(6): 16-20.
[20]
周明. 微细电火花加工放电状态辨识与预测的理论和方法[D]. 大连: 大连理工大学, 2005: 1-80. ZHOU Ming. The methodo1ogy of discharging-state identification in micro electrical discharging machining (micro-EDM)[D]. Dalian: Dalian University of Technology, 2005: 1-80.
[21]
HAN Fuzhu, WACHI S, KUNIEDA M. Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control[J]. Precision Engineering, 2004, 28(4): 378-385.
