邓效忠, 方宗德, 张金良等. 弧齿锥齿轮的高重合度设计[J]. 中国机械工程, 2002, 14(19): 791-795.DENG Xiaozhong, FANG Zongde, ZHANG Jinliang, et al. Design of spiral bevel gears with high contact ratio[J]. China Mechanical Engineering, 2002, 14(19): 791-795.
[2]
邓效忠, 方宗德, 魏冰阳.高重合度弧齿锥齿轮的接触应力与弯曲应力分析[C]//中国工程机械学会2003年年会论文集, 2003: 107-111.DENG Xiaozhong, FANG Zongde, WEI Bingyang. Analysis of contact stress and bending stress on spiral bevel gears of high contact ratio[C]//China Mechanical Engineering Society 2003 Annual Meeting Proceedings, 2003: 107-111.
[3]
唐进元, 蒲太平. 弧齿锥齿轮动态啮合有限元数值分析[J]. 机械科学与技术, 2009, 8(8): 981-985.TANG Jinyuan, PU Taiping. FEM numerical analysis of the dynamic engagement of spiral bevel gears[J]. Mechanical Science and Technology for Aerospace Engineering, 2009, 8(8): 981-985.
[4]
ASTOUL J, GENEIX J, MERMOZ E, et al. A simple and robust method for spiral bevel gear generation and tooth contact analysis[J]. International Journal on Interactive Design and Manufacturing, 2013, 7(1): 37-49.
[5]
唐进元, 蒲太平.基于有限元法的螺旋锥齿轮啮合刚度计算[J]. 机械工程学报, 2011, 47(11): 23-29.TANG Jinyuan, PU Taiping. Spiral bevel gear meshing stiffness calculations based on the finiteelement method[J]. Journal of Mechanical Engineering, 2011, 47(11): 23-29.
[6]
LITVIN F L. Gear geometry and applied theory[M]. Cambridge University Press, 2004: 613-635.
[7]
GONZALEZ-PEREZ I, ISERTE J L, FUENTES A. Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact[J]. Mechanism and Machine Theory, 2011, 46(6): 765-783.
[8]
SHEVELEVA G I, VOLKOV A E, MEDYEDEV V I. Algorithms for analysis of meshing and contact of spiral bevel gear[J]. Mechanism and Machine Theory, 2007, 42(2): 198-215.
[9]
邓效忠.高重合度弧齿锥齿轮的设计理论及实验研究[D]. 西安:西北工业大学, 2002: 49-77.DENG Xiaozhong. Research of design theory and experiments on spiral bevel gears with high contact ratio[D]. Xi’an: Northwestern Polytechnical University, 2002: 49-77.
[10]
WANG P Y, FAN S C, HUANG Z G. Spiral bevel gear dynamic contact and tooth impact analysis[J]. Journal of Mechanical Design, 2011, 133: 084501.
[11]
GONZALEZ-PEREZ I, RODA-CASANOVA V, FUENTES A, et al. A finite element model for consideration of the torsional effect on the bearing contact of gear drives[J]. Journal of Mechanical Design, 2012, 134: 071007.
