魏国红, 李峰, 桑芝富. 离心式循环压缩机叶轮内部流场的数值模拟[J]. 机械设计与制造, 2008,8: 111-113.WEI Guohong, LI Feng, SANG Zhifu. Numerical simulation of internal field of centrifugal impeller[J]. Machinery Design & Manufacture, 2008, 8: 111-113.
[2]
孙彦华. 压气机常用马氏体不锈钢冲蚀及盐雾-冲蚀性能研究[D]. 哈尔滨: 哈尔滨工程大学,2010.SUN Yanhua. Study on the properties of erosion and salt spray-erosion of martensitic stainless steel often-used to compressor[D]. Harbin: Harbin Engineering University, 2010.
[3]
陈昭运, 赵旭红, 郝维勤, 等. 1Cr11MoNiW1V1NbN钢盐浴渗铬性能研究[J]. 哈尔滨工程大学学报, 2012,33(2):249-254.CHEN Zhaoyun, ZHAO Xuhong, HAO Weiqin, et al. Study on the properties of 1Cr11MoNiW1V1NbN steel by salt bath chromizing[J]. Journal of Harbin Engineering University, 2012,33(2):249-254.
[4]
钟萍, 李健. 聚脲涂层的冲蚀磨损机理研究[J]. 摩擦学学报, 2012,32(2): 195-198.ZHONG Ping, LI Jian. Study of erosion behavior of polyuria coating[J]. Tribology, 2012,32(2): 195-198.
[5]
FINNIE I. Some reflections on the past and future of erosion[J]. Wear, 1995(186/187): 1-10.
[6]
LEVY A V. The erosion of structure alloys, ceramets and in situ oxide scales on steels[J]. Wear, 1988(127): 31-52.
[7]
BITTER J G. A study of erosion phenomena[J]. Wear, 1963(6): 5-21.
[8]
TILLY G P. A two stage mechanism of ductile erosion[J]. Wear, 1973(23): 87-96.
[9]
柳秉毅, 程晓农. 韧性金属材料冲蚀磨损机理的研究[J]. 江苏工学院学报, 1992,13(2): 40-46.LIU Bingyi, CHENG Xiaonong. Erosion mechanism in ductile metals[J]. Journal of Jiangsu Institute of Technology, 1992,13(2): 40-46.
[10]
MBABAZI J G, SHEER T J, SHANDU R. A model to predict erosion on mild steel surfaces impacted by boiler y ash particles[J]. Wear, 2010(257): 612-624.
[11]
HUANG C K, CHIOVELLI S, MINEV P, et al. A comprehensive phenomenological model for erosion of materials in jet ow[J]. Powder Technology, 2008(187): 273-279.
陈大年, 俞宇颖, 尹志华. 斜冲击界面动力学研究[J]. 爆炸与冲击, 2012,22(2): 104-110.CHEN Danian, YU Yuying, YIN Zhihua. On interface dynamics with applications to oblique impact[J]. Explosion and Shock Waves, 2012,22(2): 104-110.
[14]
王顺森, 刘观伟, 毛靖儒, 等. 汽轮机喷嘴固粒冲蚀模化试验系统及测试方法[J]. 中国电机工程学报, 2007,27(11): 103-108.WANG Shunsen, LIU Guanwei, MAO Jingru, et al. Modeling experimental system for solid particle erosion on the steam turbine nozzle blades and measuring methods[J]. Proceedings of the CSEE, 2007, 27(11): 103-108.
