张红星,张宁川. 803E掘进机刀盘振动问题浅探[J]. 隧道建设, 2007, 27(6): 76-78.ZHANG Hongxing, ZHANG Ningchuan. Brief discussion on cutter head vibration of type 803E TBM[J]. Tunnel Construction, 2007, 27(6): 76-78.
[2]
程军,巩亚东,李伟,等. 基于数字样机技术的隧道掘进刀盘破岩机理分析[J]. 中国机械工程, 2013(14): 1847-1853.CHENG Jun, GONG Yadong, LI Wei, et al. Rock breakage mechanism analysis for cutter head of TBM based on digital mockup [J]. China Mechanical Engineering, 2013(14): 1847-1853.
[3]
李刚,朱立达,杨建宇,等. 基于CSM模型的TBM滚刀的计算力学模型与求解[J]. 矿山机械, 2012(4): 8-11.LI Gang, ZHU Lida, YANG Jianyu, et al. Computational mechanics model for TBM cutters and solution based on CSM model [J]. Mining & Processing Equipment, 2012(4): 8-11.
[4]
刘泉声,时凯,朱元广,等. TBM盘形滚刀破岩力计算模型研究[J]. 煤炭学报, 2013(7): 1136-1142.LIU Quansheng, SHI Kai, ZHU Yuanguang, et al. Calculation model for rock disc cutting forces of TBM[J]. Journal of China Coal Society, 2013(7): 1136-1142.
[5]
SAMUEL S. Disc force measurements on a full-face tunnelling machine[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1984, 2(21): 83-96.
[6]
ZHANG Z X, KOU S Q, LINDQVIST P A. In-situ measurements of cutter forces on boring machine at ？sp？ hard rock laboratory[J]. Rock Mechanics and Rock Engineering, 2003, 36(1): 63-83.
[7]
ROSTAMI J. Hard rock TBM cutterhead modeling for design and performance prediction[J]. Geomechanik und Tunnelbau, 2008, 1(1): 18-28.
[8]
WANG L H, KANG Y L, CAI Z X, et al. The energy method to predict disc cutter wear extent for hard rock TBMs[J]. Tunnelling and Underground Space Technology, 2012, 28: 183-191.
[9]
ZHANG Q, QU C Y, KANG Y L, et al. Identification and optimization of energy consumption by shield tunnel machines using a combined mechanical and regression analysis[J]. Tunnelling and Underground Space Technology, 2012, 28: 350-354.
[10]
谭青,易念恩,夏毅敏,等. TBM滚刀破岩动态特性与最优刀间距研究[J]. 岩石力学与工程学报, 2012(12): 2453-2464.TAN Qing, YI Nian’en, XIA Yimin, et al. Research on rock dynamic fragmentation characteristics by TBM cutters and cutter spacing optimization[J]. Chinese Journal of Rock Mechanics and Engineering, 2012(12): 2453-2464.
[11]
李刚,王宛山. 全断面岩石掘进机滚刀间距优化研究[J]. 哈尔滨工程大学学报, 2013, 34(7): 913-917.LI Gang, WANG Wanshan. Study on optimum spacing of TBM disc cutters[J]. Journal of Harbin Engineering University, 2013, 34(7): 913-917.
[12]
霍军周,孙伟,郭莉,等. 多滚刀顺次作用下岩石破碎模拟及刀间距分析[J]. 哈尔滨工程大学学报, 2012, 33(1): 96-99.HUO Junzhou, SUN Wei, GUO Li, et al. Numerical simulation of the rock fracture process induced by multi-disc-cutters and cutter spacing design[J]. Journal of Harbin Engineering University, 2012, 33(1): 96-99.
