高殿荣,王益群,申功圻.液压控制锥阀内流场的数值模拟与试验可视化研究[J].机械工程学报, 2002, 38(4): 66-70.GAO Dianrong, WANG Yiqun, SHEN Gongqi. Numerical simulation and experimental visualization of the flow field inside hydraulic control poppet valve[J]. Chinese Journal of Mechanical Engineering, 2002, 38(4): 66-70.
[2]
CHERN M J, WANG C C. Control of volumetric flow-rate of ball valve using V-port[J]. J Fluids Eng, 2004,126(3):471-481.
[3]
LEUTWYLER Z, DALTON C. A CFD study of the flow field, resultant force and aerodynamic torque on a symmetric disk butterfly valve in a compressible fluid[J]. J Press Vessel Technol, 2008, 130(2): 021302.
[4]
江山,张京伟,吴崇健,等. 通海阀内流场的三维数值模拟[J]. 中国舰船研究, 2009, 4(2): 37-41.JIANG Shan, ZHANG Jingwei, WU Chongjian,et al. Three dimensional numerical simulation of flow fields inside sea suction valve[J]. Chinese Journal of Ship Research, 2009, 4(2): 37-41.
[5]
刘少刚,刘海丰,舒海生,等.通海阀内流道优化降低流噪声研究[J].哈尔滨工程大学学报, 2013, 34(4): 1-5.LIU Saogang, LIU Haifeng, SHU Haiseng,et al. Flow noise reduction of outboard valve based on internal flow path optimization[J]. Journal of Harbin Engineering University, 2013, 34(4): 1-5.
[6]
巴鹏,邹长星,陈卫丹.截止阀启闭时流动特征的动态数值模拟[J].振动与冲击, 2010, 29(10): 57-61.BA Peng, ZOU Changxing, CHEN Weidan. Dynamic numerical simulation of stop valve’s flow characteristic when open and close[J]. Journal of Vibration and Shock, 2010, 29(10): 57-61.
[7]
宋治伟,崔宝玲,尚照辉,等.截止阀启闭过程内部瞬太流动特性[J].工程热物理学报, 2012, 33(6): 957-960.SONG Zhiwei, CUI Baoling, SHANG Zhaohui. Transient flow characteristic of cut-off valve in opening-closing process[J]. Journal of Engineering Thermophysics, 2012, 33(6): 957-960.
[8]
陈晖,谭建平.大型模锻水压机高压大流量水阀开启力特性[J].中南大学学报:自然科学版, 2012, 43(8): 2993-2999.CHEN Hui, TAN Jianping. Opening force characteristic of water valve with high pressure and large flow capacity in large die forging hydraulic press[J]. Journal of Central South University: Science and Technology, 2012, 43(8): 2993-2999.
[9]
项美根,项晓明,徐永杰,等.阀门启闭扭矩连续测试装置的试验与研究[J].阀门, 2007(5): 15-17.XIANG Meigen, XIANG Xiaoming, XU Yongjie, et al. Valve torque testing device for testing and research[J]. Valve, 2007(5): 15-17.
[10]
刘鹤年. 流体力学[M]. 北京:中国建筑工业出版社,2004: 45-68.
[11]
陈晓明,赵成璧,林慰.浸入边界法的发展现状及其应用[J]. 广东造船, 2009(1): 44.CHEN Xiaoming, ZHAO Chengbi, LIN Wei. Development and application of immersed boundary method[J]. Guangdong Shipbuilding, 2009(1) : 44.
[12]
李宝良, 范振兴.基于CFD混流泵内流场数值分析[J].大连交通大学学报, 2011, 32(1): 43-46.LI Baoliang, FAN Zhenxing. Numerical simulation of interior flow field of mixed-flow pump based on CFD[J]. Journal of Dalian Jiaotong University, 2011,32(1): 43-46.
