何蕴增,邹广平,潘信吉.扭转冷作硬化的试验研究及分析[J].实验力学,1994(3): 263？269.HE Yunzeng, ZOU Guangping, PAN Xinji. Research and analysis of torsion cooling hardening[J]. J Experimental Mechanics, 1994(3): 262？269.？
[2]
邹广平,张学义,吴国辉，等.Q235钢筋母材冷作硬化试验研究[J]. 哈尔滨工程大学学报,2002,23(3):102？104.ZOU Guangping,ZHANG Xueyi,WU Guohui,et al. Experimental study on cold？work hardening of Q235 reinforcing steel[J]. Journal of Harbin Engineering University,2002,23(3):102？104.
[3]
杨丽红,何蕴增,吴国辉,等.基于扭转试验的大变形本构关系分析[J].哈尔滨工程大学学报,2006,26(6):816？820.YANG Lihong, HE Yunzeng, WU Guohui. Analysis of large strain constitutive relationship based on torsion test[J]. Journal of Harbin Engineering University, 2006, 26(6): 816？820.？
[4]
赵慧娟,庄茁,郑泉水. 大变形扭转塑性硬化的实验和仿真研究[J]. 力学学报, 2002,34(5):804？811.ZHAO Huijuan,ZHUANG Zhuo,ZHENG Qauanshui.Test and simulation for large deformed torsion and plastic hardening[J]. Acta Mechanica Sinica, 2002,34(5):804？811
[5]
何蕴增,邹广平.实心圆轴扭转测定本构关系的概念和方法[J]. 实验力学,2003,18(3):426？432.HE Yunzeng, ZOU Guangping. The concept and method for determining the constitutive law of materials by torson test with cylindrical specimens[J]. Journal of Experimental Mechanics,2003,18(3):426？432.
[6]
CULVER R S. Metal effect at high strain rates [M]. New York: Plenum,1973:519？575.？
[7]
徐天平,王礼立,卢维娴. 高应变率下的钛合金Ti26Al24V的热？粘塑性特性和绝热剪切变形[J].爆炸与冲击,1987,7(1):1？7.XU Tianping, WANG Lili, LU Weixian. The thermo？vis？coplasticity and adiabatic shear deformation for a Titanium alloy Ti？6Al？4V under high strain rates [J]. Explosion and Shock Waves,1987,7(1):1？7.？
[8]
姜风春,刘瑞堂,张晓欣. 945钢的动态力学性能研究[J].兵工学报,2000 ,21(3):295？298.JIANG Fengchun, LIU Ruitang,ZHANG Xiaoxin. A study on the dynamic mechanical behaviors of ship？building steel 945 [J].Acta Armamentarii, 2000,21 (3):295？298.？
