全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

抛光工艺对硅基Pb_(1-x)Ge_xTe薄膜性能的影响

Keywords: 抛光,Si基板,Pb_(1-x)Ge_xTe薄膜,沉积速率,光学常数

Full-Text   Cite this paper   Add to My Lib

Abstract:

研究了不同的抛光方法(机械抛光、化学腐蚀及化学机械抛光)对硅基板上沉积的Pb_(1-x)Ge_xTe薄膜性能的影响.研究表明,经化学机械抛光(SiO_2胶体或Cr~+)的硅基板上所沉积的Pb_(1-x)Ge_xTe薄膜具有致密的结构及平直的界面,其沉积速率也比在化学腐蚀抛光表面的沉积速率大7%或18%(分别对应<111>和<100>晶向);薄膜具有明显高于化学腐蚀抛光基板沉积薄膜的折射率,且折射率随温度的降低而增加,而低温下折射率随波长的增加而增加;化学腐蚀抛光基板沉积薄膜的折射率的增加量明显大于化学机械抛光基板沉积薄膜的增加量;薄膜层经机械抛光后,其膜层结构、组分及其深度分布均未改变,但透射率增加,消光系数有所改善,折射率有所降低.

References

[1]  【1】Li B, Jiang J C, Zhang SY,etal, Low-temperature dependence of mid-infrared optical constants of lead germanium telluride thin film[J].Appl. Phys.,2002,91(6): 3556—3561.
[2]  【2】Li B, Zhang S, Zhang F,et al. Crystal structure,morphology, depth profile of elements and mid-infrared optical constants of “mild” lead telluride film[J].Appl. Phys. A., 2003,76(6): 965—968.
[3]  【3】LI Bin, ZHANG Su-Ying, XIE Ping,et al. Improving lowtempenature performance of infrared optical coatings utilizing the abnormal refractive index ofPb1-xGexTe[J]. Optical Instruments(李斌,张素英,谢平,等.利用Pb1-xGexTe材料的折射率异常性质改善红外光学薄膜的低温特性,光学仪器), 2004,26(2): 169—173.
[4]  【4】Woolley J C, Nikolic P. Some properties ofGeTe-PbTe alloys[J].Electrchem. Soc.,1965,112(4): 82—84.
[5]  【5】Dalven R. A review of the semiconductor properties of PbTe, PbSe, PbS and PbO [J].Infrared Phys.,1969, 9(4): 141—184.
[6]  【6】Brebrick R F. Composition stability limits for the rocksaltstructure phase (Pb1-ySny)1-xTexfrom lattice parameter measurements[J].Phys. Chem. Solids., 1971,32(3):551—562.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133