全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

光学读出红外成像中反光板变形对光学检测灵敏度的影响

Keywords: 非制冷红外成像,双材料微悬臂梁,光学读出,焦平面阵列

Full-Text   Cite this paper   Add to My Lib

Abstract:

在刀口滤波光学读出方法的基础上,讨论了反光板弯曲的情况下,刀口滤波方法的光学检测灵敏度与反光板长度之间的关系.分析表明,在反光板曲率半径一定的情况下,光学检测灵敏度首先随着反光板长度的增加而增大,达到最大值后随着反光板长度的增加而减小.对于不同曲率半径和长度的反光板,分析给出反光板长度L和曲率半径R在满足L2/R=λ(λ为照明光波长)时,光学检测灵敏度达到最大值.实验测量了已制作的像素尺寸分别为200μm,120μm和60μmFPA的光学检测灵敏度,其实验结果和理论分析一致.

References

[1]  【1】苏波,段国腾,张存林, "基于双材料微悬臂梁阵列的太赫兹波探测系统的研究",中国激光 38, 111002--1(2011)
[2]  【1】Zhao Y, Mao M, Horowitz R, et al. Optomechanical uncooled infrared imaging system: design, microfabrication and performance[J]. J.MEMS, 2002, 11 (2):136—146.
[3]  【2】DUAN Zhi-Hui, ZHANG Qing-Chuan, WU Xiao-Ping, et al. Uncooled optically readable bimaterial micro-cantilever infrared imaging device[J]. Chin.Phys.Lett., 2003, 20 (12):2130—2132.
[4]  【3】MIAO Zheng-Yu, ZHANG Qing-Chuan, GUO Zhe-Ying, et al. Optical readout method for microcantilever array sensing and its sensitivity analysis[J]. Opt. Lett., 2007, 32 (6), 594—596.
[5]  【4】GUO Zhe-Ying, ZHANG Qing-Chuan, CHEN Da-Peng, et al. Optical-readout room temperature infrared imaging[J]. J.Expermental Mechanics (郭哲颖, 张青川, 陈大鹏, 等.光 学读出室温物体红外成像. 实验力学 ), 2005, 20 (2): 213—218.
[6]  DONG Feng-Liang,ZHANG Qing-Chuan,WU Xiao-Ping,et al. Bi-material micro-cantilever uncooled infrared imaging system-design and fabrication of Micro-Cantilever Array [J]. J. Infrared Millim. Waves (董凤良,张青川,伍小平,等.双材料微梁阵列非制冷红外成像系统-微梁阵列的 设计与制作.红外与毫米波学报 ),2005,24(6):409-413.
[7]  【6】Stoney G G.The tension of metallic films deposited by electrolysis[C]. London:procRoy. Soc. A, 1989, 82 , 172175.
[8]  【7】Lin I K, ZHANG Yan-Hang, ZHANG Xin. The deformation of microcantilever-based infrared detectors during thermal cycling[J]. J. Micromech. Microeng, 2008, 18 , 075012.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133