全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

织构对铟凸点剪切强度的影响

Keywords: 织构铟凸点剪切强度金属结构分析倒装焊

Full-Text   Cite this paper   Add to My Lib

Abstract:

制作了2种形式的铟凸点:即直接蒸发沉积的铟柱和将铟柱回流得到的铟球。同时对比了铟柱和铟球2种凸点的剪切强度,测试结果表明铟球剪切强度为5.6MPa,铟柱的剪切强度为1.9MPa,前者约为后者的2.9倍。对铟凸点微观结构的X光衍射分析发现:铟柱剪切强度低是织构弱化所致;铟球剪切强度高是由于回流破坏了铟柱的理想(101)丝织构模式,从而提高了铟球的剪切强度。

References

[1]  Reed R P, McCowan C N, Walsh R P, et al. Tensile strength and ductility of indium [ J ]. Mater. Sci. Eng. ,1988, 102(2): 227-236.
[2]  LIU Yu-Dong, ZHANG Gang, ZHU Ji-Man, et al. Microstructure study of magnetron-sputtered indium using EBSP method[J].Rare Metal(刘豫东,张钢,朱继满,等.EBSP对磁控溅射甸的组织研究.稀有金属),2002,18(4):226-229.
[3]  Blind Jean Mary, George Amand, Champier Georges. Left bracket X-Ray topographic study of dislocations in indium right bracket[J]. Acta Metal, 1979, 27(3): 471-481.
[4]  Blind J M, George A, Champeier G. Dislocations and slip systems in indium single crystals [ C ]. In: proceedings of the 5th international conference, New York: Pergamon Press,1979: 175-179.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133