全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
核技术  2014 

工质替代FLiBe研究涡流二极管单向特性的模化分析

DOI: 10.11889/j.0253-3219.2014.hjs.37.110602, PP. 110602-110602

Keywords: 氟盐冷却高温堆,非能动余热排出系统,涡流二极管,模化分析,FliBe

Full-Text   Cite this paper   Add to My Lib

Abstract:

涡流二极管作为氟盐冷却高温堆(Fluoride-salt-cooledHigh-temperatureReactor,FHR)非能动余热排出系统的关键设备,其单向性将影响FHR事故工况下排出堆芯余热的能力和正常工况时堆芯的热损失。为了研究在冷却剂FLiBe熔盐工质下涡流二极管的单向特性,并解决FLiBe较强腐蚀性、高熔点直接进行实验难度较大及成本较高的问题,本文采用比较安全和便于实验的水、#22透平油和HTS-1作为FLiBe的替代工质,通过相似理论进行流体模化,并采用数值模拟方法研究模化方法的可行性。结果表明:采用HTS-1、水和#22透平油工质代替FLiBe研究相同结构尺寸涡流二极管内的单向特性是可行的。HTS-1模化FLiBe在涡流二极管内流动可实现完全相似,水和#22透平油模化FLiBe可实现部分相似。通过数值模拟初步验证部分相似模化方法是可行的。

References

[1]  Charles Forsberg, Lin-wen Hu, Per F. Peterson, Kumar Sridharan. Fluoride-salt-cooled high-temperature reactors(FHRs) for base-load and peak electricity grid stabilization and process heat[R]. MIT CANES Report, 2013.
[2]  Zobel R. Experiments on a Hydraulic Reversing Elbow [J]. Mitt Hydr Inst Munich, 1930,19(8) : 1-47.
[3]  Priestman GH. A Study of Vortex Throttles Part 1: Experimental[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1987, 201 (5): 331-336.
[4]  Kulkarni AA, Ranade VV, Rajeev R, et al. CFD simulation of flow in vortex diodes[J]. AIChE Journal, 2008, 54 (5): 1139-1152.
[5]  Kulkarni AA, Ranade VV, Rajeev R, et al. Pressure drop across vortex diodes: Experiments and design guidelines[J]. Chemical Engineering Science, 2009, 64 (6): 1285-1292.
[6]  郭彦华.核用气动式脉冲液体射流泵和涡流二极管泵性能实验研究[D].清华大学, 2004.
[7]  王乐勤, 孙青军, 焦磊. 涡流二极管泵输送系统性能研究[J]. 工程热物理学报, 2009, 30(09): 1499-1501.
[8]  Michael J.Bowe ALW. Fluidic appartus[P]. US Patent 4887628, 1989.
[9]  Param I.Singh L, Mass. Vortex-diode check valve with flexible diaphragm[P]. US Patent 4295988, 1981.
[10]  李之光. 相似与模化(理论及应用)[B].国防工业出版社,1982.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133