Zhang T，, Brust B， Wilkowski G. Weld Residual Stress Analysis and the Effects of Structural Overlay on Various Nuclear Power Plant Nozzles [C], Proceedings of the ASME 2010 Pressure Vessels & Piping Division, July18-22,2010,Bellevue,Washington,USA.
[2]
Tsai YL, Wang LH., Fan TW., Ranganath S, Wang CK., Chou CP.. Welding overlay analysis of dissimilar metal weld cracking of feedwater nozzle. International [J]. Journal of Pressure Vessels and Piping , 2009, 87(5): 26-32.
[3]
Marlette S, Treyer P. Simulation and Measurement of Through-wall Residual Stresses in a Structural Weld Overlaid Pressurizer Nozzle. [C]. Proceedings of the ASME 2010 Pressure Vessels & Piping Division. July 18-22,2010, Bellevue, Washington, USA.
[4]
Killian DE.. Design of a Weld Overlay for a Large Bore Pipe Nozzle to Optimize Residual Stress. [C].Proceedings of the ASME 2010 Pressure Vessels & Piping Division. July 18-22,2010, Bellevue, Washington, USA.
[5]
Liu R F, Huang C C. Welding residual stress analysis for weld overlay on a BWR feedwater nozzle[J]. Nuclear Engineering and Design, 2012.
[6]
Varfolomeev I, Ivanov D et al. Probabilistic leak-before-break assessment of a main coolant line [C]. PVP2010, July 18-22,2010, Bellevue, Washington, USA, PVP2010-25676.
[7]
Itatani M, Saito T, Hayashi T, et al. Evaluation of fracture characteristics of Ni-base weld metal for BWR components [C]. Proceedings of the ASME 2009 Pressure Vessels and Piping Divisions Conference, PVP2009, July 26-30, 2009, Prague, Czech Republic. (PVP2009-77720).
[8]
Tanguy B, Besson J, Piques R, et al. Ductile to brittle transition of an A508 steel characterized by Charpy impact test: Part I: experimental results[J]. Engineering fracture mechanics, 2005, 72(1): 413-434.
[9]
刘建章.核结构材料[M]. 北京：化学工业出版社，2007.
[10]
PWR Material Realiability Project, Interim Alloy 600 Safety Assessment for U.S. PWR Plants, Part 1: Alloy82/182 pipe butt welds. EPRI Report TP-1001491, 2001.
[11]
Celin R, Tehovnik F. Degradation of a Ni-Cr-Fe Alloy in a Pressurised-Water Nuclear Power Plant[J]. Materiali in tehnologije, 2011, 45(2): 151-157.
[12]
Jenssen A, Norrgard K, Lagerstron J. Assessment of cracking in dissimilar metal welds [C], Proc. of Tenth Int. Symp. on Envionmental Degradation of Materials in Nuclear Power Systems-Water Reactors. USA: NACE International. 2001: CD-ROM.
[13]
Farley S. An overview of non destructive inspection service in nuclear power plants [C]. International Conference on Nuclear Energy for New Europe. Portoraz, Slovenia, 2004.
[14]
ASME. Boiler and pressure vessel code, code case N-504-2. Alternative rules for repair of classes 1，2 and 3 austenitic stainless steel piping section XI，division 1;1995.
[15]
Wang H T, Wang G Z, Xuan F Z, et al. Numerical investigation of ductile crack growth behavior in a dissimilar metal welded joint[J]. Nuclear Engineering and Design, 2011, 241(8): 3234-3243.
[16]
Gong N, Wang G Z, Xuan F Z, et al. Leak-before-break analysis of a dissimilar metal welded joint for connecting pipe-nozzle in nuclear power plants[J]. Nuclear Engineering and Design, 2013, 255: 1-8.
