Karbasian H, Tekkaya A E. A review on hot stamping[J]. Journal of Materials Processing Technology, 2010,210(15):2103-2118.
[2]
朱敏,姬琳,叶辉. 考虑侧碰的汽车B柱加强板材料性能梯度优化[J]. 吉林大学学报:工学版,2011,41(5):1210-1215. Zhu Min, Ji Lin,Ye Hui. Optimization of yield stress distribution on in B pillar reinforcement panel regarding side crash worthines[J]. Journal of Jilin University (Engineering and Technology Edition), 2011,41(5): 1210-1215.
[3]
Naderi M, Ketabchi M, Abbasi M, et al. Semi-hot stamping as an improved process of hot stamping[J]. Journal of Materials Science & Technology,2011,27(4):369-376.
[4]
Mun D J, Shin E J, Choi Y W, et al. Effects of cooling rate, austenitizing temperature and austenite deformation on the transformation behavior of high-strength boron steel[J]. Materials Science and Engineering A,2012,545: 214-224.
[5]
Cui Jun-jia, Lei Cheng-xi, Xing Zhong-wen, et al. Microstructure distribution and mechanical properties prediction of boron alloy during hot forming using FE simulation[J] Materials Science and Engineering A, 2012,535:241-251.
[6]
Li M V, Niebuhr D V, Meekisho L L, et al. A computational model for the prediction of steel hardenability[J]. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science,1998,29(3):661-672.
[7]
Bok H H, Lee M G, Pavlina E J, et al. Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part[J]. International Journal of Mechanical Sciences, 2011,53(9):744-752.
[8]
Bardelcik A, Salisbury C P, Winkler S,et al. Effect of cooling rate on the high strain rate properties of boron steel[J]. International Journal of Impact Engineering, 2010,37(6):694-702.
[9]
Nishibata T, Kojima N. Effect of quenching rate on hardness and microstructure of hot-stamped steel[J]. Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan,2010,96(6):378-385.
[10]
Naderi M, Saeed-Akbari A, Bleck W. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel[J]. Materials Science and Engineering A,2008,487(1-2):445-455.
[11]
谈庆明. 量纲分析[M]. 合肥:中国科学技术大学出版社,2005.
[12]
Bhaskar R, Nigam A. Qualitative physics using dimensional analysis[J]. Artificial Intelligence, 1990, 45(1-2):73-111.
[13]
马增胜. 纳米压痕法表征金属薄膜材料的力学性能[D]. 湘潭:湘潭大学材料与光电物理学院,2011. Ma Zeng-sheng. Characterization of the mechanical properties of metallic films by nanoindentation method[D]. Xiangtan: Faculty of Materials,Optoelectronics and Physics, Xiangtan University, 2011.
[14]
Hora P, Roll K, Volk W,et al. Nunmisheet 2008[DB/OL].[2013-02-05]. http://wenku.baidu.com/link?url=SbLuE5QWYXt6ggJXIRGT-XIGY3y1XlZCwS0VpxFt_KIVLrTFTRQ2knmpZwcf79Tm_lyOsShgfzJRCs4VFhZKQRbhbn-2-p0TdnP44AqS2kC.
[15]
Turetta A, Bruschi S, Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations[J]. Journal of Materials Processing Technology,2006,177(1-3): 396-400.
