全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

轮式装载机液压系统的散热器匹配及仿真

, PP. 1124-1129

Keywords: 流体传动与控制,液压系统,液冷散热器,锯齿翅片,流动均匀性

Full-Text   Cite this paper   Add to My Lib

Abstract:

为了解决装载机液压系统夏季工作时油温过高问题,应用试验和数值仿真相结合的方法,为液压系统匹配了一款换热效率更高的板翅式液冷散热器,研究了不同条件下散热器内部流场和温度场的变化。仿真结果表明:锯齿翅片的传热效率明显高于平直翅片;散热器耐压特性满足规定要求;导流片角度为45°时冷却液流动均匀性最好。该散热器解决了液压油散热器散热不足的问题。

References

[1]  张毅,愈小莉,陆国栋,等. 装载机散热系统过热现象的研究[J]. 浙江大学学报,2006,40(7):1183-1186. Zhang Yi,Yu Xiao-li,Lu Guo-dong,et al. Research of loader cooling system overheat problem[J]. Journal of Zhejiang University,2006,40(7):1183-1186.
[2]  王剑鹏,秦四成,赵克利. 50型轮式装载机液压系统的热平衡[J]. 吉林大学学报:工学版,2009,39(3):652-656. Wang Jian-peng,Qin Si-cheng,Zhao Ke-li. Thermal balance of hydraulic system of a 50 type wheel loader[J]. Journal of Jilin University(Engineering and Technology Edition),2009,39(3):652-656.
[3]  袁哲,马文星,李华龙,等. 重型车液力减速器的换热器匹配与仿真分析[J]. 吉林大学学报:工学版,2013,43(增刊1):526-529. Yuan Zhe,Ma Wen-xing,Li Hua-long,et al. Match of heat exchanger and simulation analysis based on hydrodynamic retarder of heavy vehicle[J]. Journal of Jilin University(Engineering and Technology Edition), 2013,43(Sup.1):526-529.
[4]  董军启,陈江平,袁庆丰,等. 板翅换热器平直翅片的传热与阻力性能试验[J]. 农业机械学报,2007,38(8):53-57. Dong Jun-qi,Chen Jiang-ping,Yuan Qing-feng,et al. Flow and heat transfer on compact smooth fin surfaces[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(8):53-57.
[5]  王福军.计算流体力学分析[M].北京:清华大学出版社,2004.
[6]  陶文铨.数值传热学[M]. 2版. 西安:西安交通大学出版社,2004.
[7]  Incropera F P, Witt De D P. Foundation of Heat and Mass Transfer[M].New York: Wiley and Sons,1990.
[8]  焦安军,厉彦忠,张瑞,等. 板翅式换热器不同结构导流片导流性能的研究[J]. 西安交通大学学报,2001,35(11):1113-1116. Jiao An-jun,Li Yan-zhong,Zhang Rui,et al. Flow distribution performance of different distributor's configuration in plate-fin heat exchanger[J]. Journal of Xi'an Jiaotong University,2001, 35(11):1113-1116.
[9]  张毅,愈小莉,陆国栋,等. 进出油管位置影响板翅式油冷器性能的数值模拟[J]. 农业机械学报,2007,38(2):154-156. Zhang Yi,Yu Xiao-li,Lu Guo-dong,et al. Numerical simulation the effect of inlet-outlet-tube position on plate-fin oil cooler[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(2):154-156.
[10]  刘佳鑫. 工程机械散热模块传热性能研究[D]. 长春:吉林大学机械科学与工程学院,2013. Liu Jia-xin. Research on heat transfer performance of heat-dissipation module for construction machinery[D]. Changchun: College of Mechanical Science and Engineering,Jilin University, 2013.
[11]  徐振元. 工程车辆波纹翅片散热器特性分析与应用研究[D]. 长春:吉林大学机械科学与工程学院,2012. Xu Zhen-yuan. Research on characteristics and application of wave fin radiator in engineering vehicle[D]. Changchun: College of Mechanical Science and Engineering, Jilin University, 2012.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133