陈明明,何文武,刘艳光,等. 316LN奥氏体不锈钢亚动态再结晶行为的研究[J].锻压装备与制造技术,2010(4):83-86.Chen Ming-ming, He Wen-wu, Liu Yan-guang, et al. Research on meta-dynamic recrystallization of 316LN austenitic stainless steel[J]. China Metal Forming Equipment & Manufacturing Technology, 2010(4): 83-86.
[2]
Ganesan V, Ganesh Kumar J, Laha K, et al. Notch creep rupture strength of 316LN SS and its variation with nitrogen content[J]. Nuclear Engineering and Design, 2013, 254: 179-184.
[3]
Zhang X Z, Zhang Y S, Li Y J, et al. Cracking initiation mechanism of 316LN stainless steel in the process of the hot deformation[J]. Materials Science and Engineering A, 2013, 559: 301-306.
[4]
Schwartz J, Fandeur O, Rey C. Fatigue crack initiation modeling of 316LN steel based on non local plasticity theory[J]. Procedia Engineering, 2010,2(1):1353-1362.
[5]
康欢举,杨爽,孙华. 316LN的应力腐蚀开裂实验研究[J]. 核动力工程,2011, 32(6):101-104,114.Kang Huan-ju, Yang Shuang, Sun Hua. Experimental study on stress corrosion cracking of 316LN[J]. Nuclear Power Engineering, 2011, 32(6):101-104,114.
[6]
Kim H C, Kim K, Lee Y S, et al. Study on the weld characteristics of 316LN by magnetization measurement[J]. Journal of Nuclear Materials, 2009, 386-388: 650-653.
[7]
Ozcelik B, Kuram E, Simsek B T. Comparison of dry and wet end milling of AISI 316 stainless steel[J]. Materials and Manufacturing Processes, 2011, 26(8):1041-1049.
[8]
张义帅,张秀芝,田香菊,等. 316LN不锈钢锻造开裂锻件组织与断口分析[J]. 锻压技术,2011, 36(6):1-3.Zhang Yi-shuai, Zhang Xiu-zhi, Tian Xiang-ju, et al. Analysis of forging structure and fracture for 316LN stainless steel forging crack[J]. Forging and Stamping Technology, 2011, 36(6):1-3.
[9]
He W W, Liu J S, Chen H Q, et al. Processing maps and microstructure evolution of 316LN stainless steel[J]. Advanced Science Letters, 2011,4(3): 1235-1239.
[10]
黑志刚,段兴旺,刘建生. 温度和应变速率对316LN钢高温性能的影响[J].太原科技大学学报,2012,33(4): 290-293.Hei Zhi-gang, Duan Xing-wang, Liu Jian-sheng. Influence of temperature and strain rate on the high-temperature performances of 316LN steel[J]. Journal of Taiyuan University of Science and Technology, 2012, 33(4): 290-293.
[11]
臧金鑫,陶乐晓,冯朝辉,等. 热变形参数对新型Al-Zn-Mg-Cu高强铝合金微观组织的影响[J]. 塑性工程学报,2011,18(5):38-42.Zang Jin-xin, Tao Le-xiao, Feng Zhao-hui, et al. Influence of the deformation parameters on microstructures of a new Al-Zn-Mg-Cu high strength aluminum alloy[J]. Journal of Plasticity Engineering, 2011, 18(5): 38-42.
[12]
徐恒钧.材料科学基础[M]. 北京:北京工业大学出版社,2001:409.
[13]
张小立,庄传晶,吉玲康,等. 高钢级管线钢的有效晶粒尺寸[J]. 机械工程材料,2007, 31(3): 4-8.Zhang Xiao-li, Zhuang Chuan-jing, Ji Ling-kang, et al. Effective particle size of high grade pipeline steels[J]. Materials for Mechanical Engineering, 2007, 31(3): 4-8.
[14]
朱宝辉,胡晓晨,吴孟海,等. TC1钛合金精锻棒材的拉伸性能及断口形貌[J]. 中国有色金属学报,2010,20(专辑1):144-147. Zhu Bao-hui, Hu Xiao-chen, Wu Meng-hai, et al. Tensile properties and fractographs of finish forged bar of TC1 titanium alloy[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(Special 1): 144-147.
[15]
陈朝阳,章金晶,杭先霞,等. 锂离子电池用电解铜箔的断裂研究[J]. 电源技术,2010,34(5):442-445. Chen Zhao-yang, Zhang Jin-jing, Hang Xian-xia, et al. Research of broken copper foil for Li-ion cell[J]. Chinese Journal of Power Sources, 2010, 34(5): 442-445.
[16]
李明,宋月清,崔舜,等. V5Cr5Ti合金的高温拉伸性能及其断口特征[J]. 稀有金属,2007,31(4):420-424.Li Ming, Song Yue-qing, Cui Shun, et al. High temperature tensile properties and fracture character of V5Cr5Ti alloy[J]. Chinese Journal of Rare Metals, 2007, 31(4): 420-424.
[17]
潘品李, 钟约先, 马庆贤,等. 316LN钢多道次变形条件下的动态再结晶行为[J]. 塑性工程学报,2011, 18(5): 13-18.Pan Pin-li, Zhong Yue-xian, Ma Qing-xian, et al. Research on the dynamic recrystallization behavior of 316LN steel under multi-pass deformation[J]. Journal of Plasticity Engineering, 2011, 18(5): 13-18.
