全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2004 

T300碳纤维热处理对Cf/SiC复合材料性能的影响

Keywords: T300碳纤维,热处理,Cf/SiC,先驱体浸渍裂解

Full-Text   Cite this paper   Add to My Lib

Abstract:

以聚碳硅烷先驱体浸渍裂解工艺制备T300碳纤维增强3DCf/SiC复合材料,研究了T300碳纤维预先热处理对材料性能的影响.结果表明,热处理能够弱化Cf/SiC复合材料中纤维-基体界面结合,减少碳纤维在复合过程的损伤,显著提高复合材料性能.纤维经热处理后制备的Cf/SiC复合材料弯曲强度和断裂韧性分别从未经处理的154MPa,4.8MPa·m1/2提高到437MPa,20.4MPa·m1/2.

References

[1]  王建方.碳纤维在PIP工艺制备陶瓷基复合材料过程中的损伤机理研究[D].长沙:国防科学技术大学,2003.
[2]  DRZAl L T, MADHUKAR M. Fiber-matrix adhesion and its relationship to composites mechanical properties [J]. J Mater Sci,1993, 28:569-610.
[3]  JIANG X X, BRYDSON R, APPLEYARD S P, et al. Characterization of the fibre-matrix interfacial structure in carbon fibre-reinforced polycarbosilane-derived SiC matrix composites using STEM/EELS [J]. Journal of Microscopy, 1999, 196(11):203-212.
[4]  DHAKATE S R, PARASHAR V K, RAMAN V, et al. Influence of ceramic interphase on the mechanical properties of T-300 carbon fiber composites [J]. Journal of Materials Science Letters, 2000, 19:1575-1577.
[5]  LEE J S, KAMG T J. Changes in physic-chemical and morphological properties of carbon fiber by surface treatment [J]. Carbon, 1997, 35(2):209-215.
[6]  VINCENT C. ESCA charaterization of boron and silicon carbide mixed layers deposited on HR and HM carbon fibres by RCVD[J]. Composites:Part A, 1996, 27:365-377.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133