全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2005 

A356Al/TiB2颗粒增强铝基复合材料的搅拌摩擦焊

Keywords: 铝基复合材料,颗粒,搅拌摩擦焊

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用纯机械化的固相连接技术-搅拌摩擦焊成功地焊接了应用原位反应合成法制造的铸态A356Al/6.5%TiB2(体积分数)颗粒增强铝基复合材料,与铝合金相比,铝基复合材料搅拌摩擦焊的焊缝质量对焊接参数更为敏感。该连接方法在较低温度下实现铝基复合材料的焊接,避免了基体铝合金与增强相之间的化学反应,同时在搅拌头机械搅拌、挤压和摩擦热的共同作用下,焊缝区基体材料的晶粒和增强相被破碎并形成再结晶晶核,细化了组织结构,增强相分布也更加弥散。焊缝区的硬度值波动范围很小,抗拉强度比母材增加约20%。研究表明,搅拌摩擦焊用于连接颗粒增强铝基复合材料具有明显的优势。

References

[1]  任家烈,吴爱萍.先进材料的连接[M].北京:机械工业出版社,2000.
[2]  LIU Li ming, ZHU Mei li, et al. Studying of micro-bonding in diffusion welding joint for composite[J]. Materials Science and Engineering, 2001, A135,: 103-107.
[3]  曲文卿,王奇娟,张彦华.铝基复合材料与铝合金的TLP扩散连接[J].焊接学报,2002,23(6):67-70.
[4]  栾国红,郭德伦,等.铝合金的搅拌摩擦焊[J].焊接技术,2003,23(1):1-4.
[5]  JOHN A WERT. Microstructures of friction stir weld joint between an aluminum-base metal matrix composite and a monolithic aluminum alloy [J]. Scripta Materialia, 2003, 49: 607-612.
[6]  张田仓,周荣林,南利辉.SiCp/2024Al复合材料搅拌摩擦焊技术研究[A].第十次全国焊接会议论文集(第1册)[C].哈尔滨:哈尔滨工业大学出版社,2001.243-246.
[7]  张田仓,郭德伦,等.铝合金搅拌摩擦焊技术研究[J].机械工程学报,2002,38(2):127-130.
[8]  NIU Ji-tai, ZHANG De-ku, JI Guo-juan. Effect of pulse param eters on microstructure of joint in laser beam welding for SiCp/6063 composite [J]. Trans Nonferrous Mat Soc China,2003, 13(2): 289-293.
[9]  曾汉民.高技术新材料要览[M].北京:中国科学技术出版社,1993.
[10]  ZHANG De-ku, CHEN Yan-bin, et al. Mechanism of laser welding of SiC reinforced LD2 aluminum metal matrix composite [J]. China Welding, 2001, 10(2): 140-144.
[11]  赵明久,吕毓雄,等.碳化硅颗粒增强铝基复合材料(SiCp/2024)的扩散焊接[J].材料研究学报,2000,14(2):136-140.
[12]  陈彦宾,张德库,等.激光焊接铝基复合材料钛的原位增强作用[J].应用激光,2002,22(3):320-322,338.
[13]  夏德顺.铝基复合材料焊接研究述评[J].导弹与航天运载技术,1999,6:38-46.
[14]  董月玲,黄继华,等.碳化硅增强铝基复合材料连接研究进展[J].材料导报,2003,17(11):63-65,81.
[15]  WANG H M, CHEN Y L, YU L G. In-situ weld-alloying/ laser beam welding of SiC/6061Al MMC[J]. Materials Science and Engineering, 2000, A293: 1-6.
[16]  H W DE VRIES and G DEN OUDEN. Influence of welding on structure of Al-Mg-Si matrix composites [J]. Material Science and Technology, 1999, (2): 202-206.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133