全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2005 

硅生胶结构对补强硅橡胶的力学及加工性能的影响

, PP. 43-46

Keywords: 硅橡胶,动态力学性能,加工性能,力学性能

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用动态力学性能测试方法分析硅生胶分子结构对补强硅橡胶力学性能及加工性能的影响,并系统地研究了硅生胶复配体系对补强硅橡胶性能的影响.结果表明乙烯基封端硅生胶结构规整,玻璃化转变温度Tg低,补强硅橡胶耐低温性好;硅生胶中乙烯基含量高,则补强硅橡胶的力学性能好;硅生胶分子量越高,补强硅橡胶的加工流动性越差;30份甲基封端和70份乙烯基封端的硅生胶复配体系中乙烯基含量为0.15%(质量分数)时,补强性能最佳.

References

[1]  COCHRANE H,LIN C S.The influence of fumed silica properties on processing,curing and reinforcement properties of silicone rubber[J].Rubber Chemistry and Technology,1993,66:48-60.
[2]  MITRA I ARANGUREN.Rheological and mechanical properties of filled rubber:silica silicone[J].Rubber Chemistry and Technology,1994,67:820.
[3]  庄清平.白炭黑与单分散二氧化硅粒子补强橡胶的差异[J].橡胶工业,2004,51(3):138-142.
[4]  朱立新,许家瑞.改性聚乙二醇修饰高交联度不饱和聚酯网络结构的动态力学分析[J].高等学校化学学报,2004,25(5):948-951.
[5]  HUANG H H,WILLKERS G L AND CARLSON J G.Structure-property behavior of hybrid materials incorporating tetraethoxysilane with multifunctional polytetramethylene oxides[J].Polymer,1989,30:2001-2012.
[6]  RONG M Z,ZHANG Q M.Analysis of the interfacial interaction in polypropylene/silica nanocomposites[J].Polymer International,2004,53:176-183.
[7]  WADDEL W H,EVANS L R.Use of non-black fillers in tire compounds[J].Rubber Chemistry and Technology,1996,69(3):377.
[8]  王伟良.热硫化硅橡胶进展[J].有机硅材料及应用,1997,1:16-21.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133