FINO D, RUSSO N, SARACCO G, et al. A multifunctional filter for the simultaneous removal of fly-ash and NOx from incinerator flue gases [J]. Chem Eng Sci, 2004, 59(22-23):5329-5336.
[2]
ANAPPARA A A, RAJESHKUMAR S, MUKUNDAN P, et al. Impedance spectroscopic studies of sol-gel derived subcritically dried silica aerogels [J]. Acta Mater, 2004, 52(2):369-375.
[3]
SCHWARTZWALDER K, SOMERS H, SOMERS A V. Method of making porous ceramic articles [P]. USA Patent:3090094, 1963-05-21.
ZU L J, LUO S J. Study on the powder mixing and semi-solid extrusion forming process of SiCp/2024Al composites [J]. J Mater Proc Tech, 2001, 114(3):189-193.
[7]
KIM T, GOTO T, LEE B, et al. Microstructure control and mechanical properties of fibrous Al2O3/ZrO2 composites fabricated by extrusion process [J]. Scripta Mater, 2005, 52(8):725-729.
[8]
QIAO G J, MA R, CAI N, et al. Microstructure transmissibility in preparing SiC ceramics from natural wood [J]. J Mater Proc Tech, 2002, 120(1-3):107-110.
[9]
HAUGEN H, WILL J, KOHLER A, et al. Ceramic TiO2-foams:characterization of a potential scaffold [J]. J Eur Ceram Soc, 2004, 24(4):661-668.
[10]
ZHU X W, JIANG D L, TAN S H, et al. Preparation of silicon carbide reticulated porous ceramics [J]. Mater Sci Eng, 2002, A323:232-238.
[11]
FALAMAKI C, NAIMI M, AGHAIE A. Dual behavior of CaCO3 as a porosifier and sintering aid in the manufacture of alumina membrane/catalyst supports [J]. J Eur Ceram Soc, 2004, 24(10-11):3195-3201.
VERDENELLI M, PAAROLA S, CHASSAGNEUX F, et al. Sol-gel preparation and thermo-mechanical properties of porousxAl2O3-ySiO2 coatings on SiC Hi-Nicalon fibres [J]. J Eur Ceram Soc, 2003, 23:1207-1213.
[17]
XIE X Q, ZHANG D, FAN T X, et al. The fabrication of composites with interpenetrating networks based on woodceramics [J]. Mater Let, 2002, 56(1-2):102-107.
[18]
QIAN J M, WANG J P, QIAO G J, et al. Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing [J]. J Eur Ceram Soc, 2004, 24(10-11):3251-3259.
[19]
LUHLEICH H, DIAS F J, NICKEL H, et al. The coat-mix procedure using carbon fillers [J]. Carbon, 1997, 35:95-102.
[20]
SIMWONIS D, THULEN H, DIAS F J, et al. Properties of Ni/YSZ porous cermets for SOFC by tape casting and coat-mix process [J]. J Mater Proc Tech, 1999, 92(93):107-111.
[21]
MIDDLETON H, DIETHELM S, IHEINGER R, et al. Cocasting and co-sintering of porous MgO support plates with thin dense perovskite layers of LaSrFeCoO3 [J]. J Eur Ceram Soc, 2004, 24(6):1083-1086.
[22]
FUKASAWA T, DENG Z Y, ANDO M. Pore structure of porous ceramics synthesized from water-based slurry by freezedry process [J]. J Mater Sci, 2001, 36:2523-2527.
