ZHU S M,DING S Q,XI H A,et al.Low-temperature fabrication of porous SiC ceramics by preceramic polymer reaction bonding[J].Materials Letters,2005,59:595-597.
[6]
MA Q S,YU X D.Low temperature fabrication and characterization of porous SiC ceramics using polycarbosilane as binder[J].Key Engineering Materials,to be published.
[7]
HERZOG A,THUNEMANN M,VOGT U,et al.Novel application of ceramic precursors for the fabrication of composites[J].Journal of the European Ceramic Society,2005,25:187-192.
[8]
SHE J H,DENG Z Y,DONI J D,et al.Oxidation bonding of porous silicon carbide ceramics[J].J Mater Sci,2002,37:3615-3622.
[9]
GARRN I,REETZ C,BRANDES N,et al.Clot-forming:the use of proteins as binders for producing ceramic foams[J].Journal of the European Ceramic Society,2004,24:579-587.
[10]
WILHELM M,SOLTMANN C,KOCH D,et al.Ceramersfunctional materials for adsorption techniques[J].Journal of the European Ceramic Society,2005,25:271-276.
[11]
KLEEBE H J,SUTTOR D,MULLER H,et al.Decomposition-crystallization of polymer-derived Si-C-N ceramics[J].J Am Ceram Soc,1998,81(11):2971-2977.
[12]
SCHMIDT H,KOCH D,GRATHWOHL G.Micro-/macroporous ceramics from preceramic precursors[J].J Am Ceram Soc,2001,84(10):2252-2255.
[13]
COLOMBO P,BERNARDO E.Macro-and micro-cellular porous ceramics from preceramic polymers[J].Composites Science and Technology,2003,63:2353-2359.
[14]
COLOMBO P,HELLMANN J R,SHELLEMAN D L.Mechanical properties of silicon oxycarbide ceramic foams[J].J Am Ceram Soc,2001,84(10):2245-2251.
[15]
COLOMBO P,HELLMANN J R,SHELLEMAN D L.Thermal shock behavior of silicon oxycarbide foams[J].J Am Ceram Soc,2002,85(9):2306-2312.
[16]
COLOMBO P,BERNARDO E,BIASETTO L.Novel microcellular ceramics from a silicone resin[J].J Am Ceram Soc,2004,87(1):152-154.
[17]
KIM Y W,KIM S H,XU X,et al.Fabrication of porous preceramic polymers using carbon dioxide[J].Journal of Materials Science Letters,2002,21:1667-1669.
[18]
KIM Y W,PARK C B.Processing of microcellular preceramics using carbon dioxide[J].Composites Science and Technology,2003,63:2371-2377.
COLOMBO P,GRIFFONI M.Ceramic foams from a preceramic polymer and polyurethanes:preparation and morphological investigations[J].Journal of Sol-gel Science and Technology,1998,13:195-199.
[21]
NANGREJO M R,EDIRISINGHE M J.Porosity and strength of silicon carbide foams prepared using preceramic polymers[J].Journal of Porous Materials,2002,9:131-140.
[22]
MELCHER R,CROMME P,SCHEFFLER M,et al.Centrifugal casting of thin-walled ceramic tubes from preceramic polymers[J].J Am Ceram Soc,2003,86(7):1211-1213.
[23]
SZAFRAN M,WISNIEWSKI P.Effect of the bonding ceramic material on the size of pores in porous ceramic materials[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2001,179:201-208.
[24]
COLOMBO P,ROISMAN T G,SCHEFFLER M,et al.Conductive ceramic foams from preceramic polymers[J].J Am Ceram Soc,2001,84(10):2265-2268.
[25]
KIM Y W,KIM S H,WANG C M,et al.Fabrication of microcellular ceramics using gaseous dioxide[J].J Am Ceram Soc,2003,86(12):2231-2233.
[26]
LOFTON C M,MILZ C B,HUANG H Y,et al.Bicontinuous porosity in ceramics utilizing polymer spinodal phase separation[J].Journal of the European Ceramic Society,2005,25:883-889.
[27]
COLOMBO P,MODESTI M.Silicon oxycarbide foams from a silicone preceramic polymer and polyurethane[J].Journal of SolGel Science and Technology,1999,14,103-111.
[28]
DISMUKES J P,JOHNSON J W,BRADLEY J S,et al.Chemical synthesis of microporous nonoxide ceramics from polysilazanes[J].Chem Mater,1997,9:699-706.
