全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2007 

镁合金阳极氧化膜封孔处理的研究进展

, PP. 82-86

Keywords: 镁合金,氧化膜,耐蚀性,封孔

Full-Text   Cite this paper   Add to My Lib

Abstract:

封孔是进一步提高镁合金阳极氧化膜耐蚀性的有效方法,主要方法有沸水、铬酸盐、硅酸盐、磷酸盐、溶胶-凝胶以及有机物封孔,本文对以上几种方法进行了全面综述。鉴于镁合金阳极氧化膜封孔技术目前还不成熟,需加强这方面研究以满足镁合金阳极氧化工业应用。

References

[1]  师昌绪,李恒德,王淀佐,等.加速我国金属镁工业发展的建议[J].材料导报,2001,15(4):5-7.
[2]  FUNATANI K.Emerging technology in surface modification of light metals[J].Surface and Coatings Technology,2000,133-134:264-272.
[3]  LIANG J,GUO B G,TIAN J,et al.Effects of NaAlO2 on structure and corrosion resistance of microarc oxidation coatings formed on AM60B magnesium alloy in phosphate-KOH electrolyte[J].Surface and Coatings Technology,2005,(199):121-126.
[4]  SHI Z,SONG G,ATRENS A.Influence of anodising current on the corrosion resistance of anodised AZ91D magnesium alloy[J].Corrosion Science,2006,48(8):1939-1959.
[5]  KHASELEV O,WEISS D,YAHALOM J.Structure and composition of anodic films formed on binary Mg-Al alloys in KOH-aluminate solutions under continuous sparking[J].Corrosion Science,2001,(43):1295-1307.
[6]  BIRSS V,XIA S,YUE R,et al.Characterization of oxide films formed on Mg-based WE43 alloy using AC/DC anodization in silicate solutions[J].J Electrochem.Soc,2004,151(1):B1-B10.
[7]  XIA S J,YUE R,RATEICK Jr R G,et al.Electrochemical studies of AC/DC anodized Mg alloy in NaCl solution[J].J Electrochem Soc,2004,151(3):B179-B187.
[8]  郭洪飞,安茂忠,徐莘,等.镁合金微弧氧化工艺条件对陶瓷膜耐蚀性的影响[J].材料工程,2006,(3):29-32.
[9]  DUAN H P,DU K Q,YAN C W,et al.Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D[J].Electrochimica Acta,2006,51:2898-2908.
[10]  朱祖芳.铝合金阳极氧化与表面处理技术[M].北京:化学工业出版社,2004.216.
[11]  王周成,唐毅,许杰.AZ91D镁合金微弧阳极氧化膜及表面处理[J].厦门大学学报(自然科学版),2006,45(增刊):292-295.
[12]  李鑫庆,陈迪勤,余静琴.化学转化膜技术与应用[M].北京:机械工业出版社,2005.231.
[13]  MCNEILL W.The Cr-22 coating for magnesium[J].Metal Finishing,1955,53(12):57-59.
[14]  SCHMELING,EDITH L,ROSCHENBLECK,et al.Method of preparing the surfaces of magnesium and magnesium alloys[P].USA Patent:4976830,1990-12-11.
[15]  SCHMELING,EDITH L,ROSCHENBLECK,et al.Method of producing protective coatings that are resistant to corrosion and wear on magnesium and magnesium alloys[P].USA Patent:4978432,1990-12-18.
[16]  BARTAK,DUANE E,LEMIEUX,et al.Hard anodic coating for magnesium alloys[P].USA Patent:5470664,1995-11-28.
[17]  BARTON,FRANCIS T,MACCULLOCH,et al.Anodization of magnesium and magnesium-based alloys[P].USA Patent:6280598,2001-08-28.
[18]  TAN A L K,SOUTAR A M,ANNERGREN I F,et al.Multilayer sol-gel coatings for corrosion protection of magnesium[J].Surface and Coatings Technology,2005,(198):478-482.
[19]  SHAN D Y,ZHANG R F,HAN E H.Effects of Al2O3 thin film on corrosion resistance of pure Mg and its anodic coating[J].Materials Science Forum,2005,488-489:865-868.
[20]  蔡启舟,王栋,骆海贺,等.镁合金微弧氧化膜的SiO2溶胶封孔处理研究[J].特种铸造及有色合金,2006,26(10):612-614.
[21]  刘元刚,张巍,高瑾,等.镁合金微弧氧化-涂装体系的研究[J].北京科技大学学报,2005,27(2):213-217.
[22]  LIU Y G,ZHANG W,LI J Q.Microarc electrodeposition of ceramic films on double electrodes of AZ91D magnesium alloy by symmetrical AC pulse method[J].Surface Engineering,2003,19(5):345-350.
[23]  李澄,黄明珠,周一扬.提高铝及铝合金耐蚀性的无机覆盖膜[J].腐蚀科学与防护技术,1998,10(3):177-178.
[24]  王玲,张巍,李久青.镁合金微弧氧化及涂装耐电偶腐蚀的研究[J].材料保护,2005,(4):12-14.
[25]  王天石,何劼,夏乐洋,等.镁合金微弧氧化膜有机封孔耐腐蚀性能的研究[J].表面技术,2006,35(6):8-10.
[26]  袁兵,袁森,蒋百灵,等.镁合金微弧氧化及后续涂装耐盐雾腐蚀的研究[J].材料保护,2006,39(9):15-17.
[27]  蒋百灵,张淑芬,吴国建.镁合金微弧氧化陶瓷层耐蚀性的研究[J].中国腐蚀与防护学报,2002,22(5):300-303.
[28]  LIU Z M,GAO W.A novel process of electroless Ni-P plating with plasma electrolytic oxidation pretreatment[J].Applied Surface Science,2006,(253):2988-2991.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133