全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2008 

钨合金材料的动态拉伸实验研究

, PP. 9-12

Keywords: 钨合金,动态拉伸,颗粒度

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用旋转盘式间接杆-杆型冲击拉伸装置(SHTB)对颗粒度分别为2,5μm和20μm的三种91%(质量分数)细化钨合金材料在动态冲击载荷作用下的力学性能进行了实验研究,分析了三种钨合金在应变率为0.001,200,500s-1时动态力学性能,给出了颗粒度大小与材料屈服强度的关系;采用扫描电子显微镜(SEM)对动态拉伸实验中回收的试件断口进行断口分析,研究钨合金在不同应变率状态下材料的破坏特征,在动态拉伸载荷作用下钨合金材料呈现出一种混合破坏模式包括钨颗粒的劈裂以及颗粒与基体界面的开裂。

References

[1]  CIMPOERU S J,WOOWARD R L.High strain rate properties of three liquid phase sintered tungsten alloys[J].Journal of Material Science Letters,1990,9:187-191.
[2]  RITTEL D,WEISBROD G.Dynamic fracture of tungsten base heavy alloys[J].International journal of fracture,2001,212:87-98.
[3]  RAMESH K T,COATES R S.Microstructure influence on the dynamic response of tungsten heavy alloys[J].Metallurgical Transactions A,1992,23A:2625-2630.
[4]  SONG W D,LIU H Y,NING J G.Mechanical properties of 91% tungsten alloys[J].Key Engineering Materials,2007,345-346:1625-1628.
[5]  BAO G,RAMESH K T.Plastic flow of a tungsten-based composite under quasi-static compression[J].Acta Metall Mater,1993,41(9):2711-2719.
[6]  宋卫东,刘海燕,宁建国.细化钨合金力学性能研究与数值模拟[J].北京理工大学学报,2007,27(9):756-760.
[7]  SONG W D,LIU H Y,NING J G.Microstructure properties and fracture behaviors of tungsten alloys[J].Materials Science Forum,2007,567-568:417-420.
[8]  刘海燕,宋卫东,宁建国.不同晶粒度钨合金动态力学性能研究[J].材料工程,2007,(6):3-7.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133