ROBSON J D.Optimizing the homogenization of zirconium containing commercial aluminum alloys using a novel process model[J].Materials Science and Engineering A,2002,338:219-229.
[6]
STILLER K,WARREN P J,HANSEN V,et al.Investigation of precipitation in an Al-Zn-Mg alloy after two step aging treatment at 100℃and 150℃[J].Materials Science and Engineering A,2001,270:55-63.
[7]
PURDY G R,KIRKALKY J S.Homogenization by diffusion[J].Metall Trans,1971,2(2):371-378.
[8]
HE Yong-dong,ZHANG Xin-ming.The effect and mechanism of minor Cr and Mn and Ti and Zr on Al-Zn-Mg-Cu alloy[J].The Chinese Journal of Nonferrous Metals,2005,15(10):1594-1601.
[9]
FAN X G,JANG D M.The microstructure evolution of an Al-Zn-Mg-Cu alloy during homogenization[J].Materials Letters,2006,60:1475-1479.
[10]
LI Y J,ARNBERG L.A eutectoid phase transformation for the primary intermetallic particle form Alm(Fe,Mn) to Al3(Fe,Mn) in AA5182 alloy[J].Acta Materialia,2004,52:2945-2952.
[11]
COLEG S.In homogeneities and their control via solidification[J].Metall Trans,1971,2(2):357-370.
[12]
FAN X G,JANG D M.Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment[J].Transactions of Nonferrous Metals Society of China,2006,16:1247-1250.
[13]
MONDAL C,MUKHOPADHYAY A K.On the nature of T (Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy[J].Materials Science and Engineering A,2005,391:367-376.
[14]
MUKHOPADHYAYA K.On the nature of the second phase particles present in as-cast Al-Cu-Mg-Ag alloy[J].Scripta Materialia,1999,41:667-672.
[15]
XIE FY,YAN X Y,DING L,et al.A study of microstructure and microsegregation of aluminum 7050 alloy[J].Materials Science and Engineering A,2003,355:144-153.
[16]
MUKHOPADHYAY A K.Compositional characterization of Cu rich phase particles present in as-cast Al-Cu-Mg(-Li) alloys containing Ag[J].Metallurgical and Materials Transactions A,1999,30:1693-1704.
