ZHANG X C,XU B S,XUAN F Z,et al.Rolling contact fatigue behavior of plasma-sprayed CrC-NiCr cermet coatings[J].Wear,2008,265:1875-1883.
[3]
ZHANG X C,XU B S,XUAN F Z,et al.Fatigue resistance and failure mechanisms of plasma-sprayed CrC-NiCr cermet coatings in rolling contact[J].International Journal of Fatigue,2009,31:906-915.
[4]
ZHANG X C,XU B S,XUAN F Z,et al.Fatigue resistance of plasma-sprayed CrC-NiCr cermet coatings in rolling contact[J].Appled Surface Science,2008,254:3734-3744.
[5]
FUJII M,YOSHIDA A,MA J B,et al.Rolling contact fatigue of alumina ceramics sprayed on steel roller under pure rolling contact condition[J].Tribology International,2006,39(9):856-862.
[6]
FUJII M,MA J B,YOSHIDA A,et al.Influence of coating thickness on rolling contact fatigue of alumina ceramics thermally sprayed on steel roller[J].Tribology International,2006,39(11):1447-1453.
[7]
ZHU S,XU B S,YAO J K.High quality ceramic coatings sprayed by high efficiency hypersonic plasma spraying gun[J].Material Science Forum,2005,475-479:3981-3984.
[8]
JOHNSON K L.Contact Mechanics[M].Cambridge:Cambridge University Press,1992.
[9]
HOLMBERG K,MATTHEWS A,RONKAINEN H.Coatings tribology-contact mechanisms and surface design[J].Tribology International,1998,31(1-3):107-120.
[10]
SUH N P.Overview of delamination theory of wear[J].Wear,1977.44:1-16.
YOSHIDA A,FUUJII M.Influence of soft surface modification on rolling contact fatigue strength of machine element[J].Tribology International,2002,35(12):837-847.
[15]
AHMED R.Contact fatigue failure modes of HVOF coatings[J].Wear,2002,253(3):473-487.
[16]
AHMED R,HADFIELD M.Rolling contact fatigue performance of detonation gun coated elements[J].Tribology International,1997,30:129-137.
[17]
AHMED R,HADFIELD M.Failure modes of plasma sprayed WC-15%Co coated rolling elements[J].Wear,1999,230;39-55.
[18]
吴子健.热喷涂技术与应用[M].北京:机械工业出版社,2005.
[19]
张平.热喷涂材料[M].北京:国防工业出版社,2006.
[20]
楚建新.热喷涂镍铝放热反应[J].粉末冶金技术,1987,5(3):147-151.
[21]
HERTZ H.On the contact of elastic solids[J].J Reine AngewMath,1882,92:156-171.
