全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2010 

电沉积泡沫铜孔径与渗透性能的关系研究

, PP. 30-35

Keywords: 泡沫铜,孔径,渗透率,惯性系数,形状系数

Full-Text   Cite this paper   Add to My Lib

Abstract:

以电沉积方法制备了孔隙率相同的5种不同孔径的泡沫铜,采用统计的方法测得孔径尺寸并通过扫描电子显微镜(SEM)对其结构与形貌进行观察,在PBR-1型渗透性测定仪上测定单向稳态气流通过泡沫铜时产生的压降,计算材料的渗透性能参数及其与孔径间的关系。研究结果表明,在实验流速范围内,流体通过泡沫铜产生压差随流速的变化遵循Forchheimer定律,即压差随流速的增大而增大,与流速呈二次方关系,流动状态属于层流—紊流转捩区,即有局部紊流存在的层流态。实验测算出了5种不同孔径d泡沫铜的渗透性能参数(渗透率K1、惯性系数K2及形状系数f),分析了各参数随孔径d改变的变化趋势,确定孔径与渗透性能间关系的有关参量,获得电沉积泡沫铜在层流-紊流转捩区的孔径-渗透性经验方程,对电沉积泡沫铜的设计、制备及在相关应用领域的应用具有实际意义。

References

[1]  LEONG K C,JIN L W.Effect of oscillatory frequency on heat transfer in metal foam heat sinks of various pore densities[J].International Journal of Heat and Mass Transfer,2006,49:671-681.
[2]  BOOMSMA K,POULIKAKOS D,ZWICK F.Metal foams as compact high performance heat exchangers[J].Mechanics of Materials,2003,12(35):1161-1176.
[3]  LU T J,KEPETS M,DOWLING A P.Acoustic properties of sintered FeCrAlY foam$with open cells(I):Static flow resistante[J].Science in China Series E:Technological Sciences,2008,51(11):1803-1811.
[4]  MITOV M,RASHKOV R,ATANASSOV N,et al.Effects of nickel foam dimensions on catalytic activity of supported Co-Mn-B nano-composites for hydrogen generation from stabilized borohydride solutions[J].J Mater Sci,2007,42:3367-3372.
[5]  Yu H,cHEN H Q,PAN M Q,et al.Effect of the metal foam materials on the performance of methanol steam micro-reformer for fuel cells[J].Applied Catalysis A:General,2007,327:106-113.
[6]  CHIN P,SUN X L,ROBERTS G W,et al.Preferential oxidation of carbon monoxide with iron-promoted platinum catalysts supported on metal foams[J].Applied Catalysis A:General,2006,302:22-31.
[7]  DESPOIS J F,MORTNSEN A.Permeability of open-pore microcellular materials[J].Acta Materialia,2005,53:1381-1388.
[8]  PAEK J W,KANG B H,KIM S Y,et al.Effective thermal conductivity and permeability of aluminum foam materials[J].International Journal of Thermophysics,2000,21(2):453-464.
[9]  DUKHAN N.Correlations for the pressure drop for flow through metal foam[J].Exp Fluids,2006,41:665-672.
[10]  BHATTACHARYA A,CALMIDI V V,MAHAJAN R L.Thermophysical properties of high porosity metal foams[J].International Journal of Heat and Mass Transfer,2002,45:1017-1031.
[11]  FOURIE J G,PLESSISDU J P.Pressure drop modelling in cellular metallic foams[J].Chemical Engineering Science,2002,57:2781-2789.
[12]  BONNET J P,TOPIN F,TADRIST L.Flow laws in metal foams:compressibility and pore size effects[J].Transport Porous Med,2008,73:233-254.
[13]  赵鹏,浦玉萍,吕广庶.超声波对聚氨酯泡沫塑料化学镀铜的影响[J].材料工程,2008,(4):43-46.
[14]  赵鹏,浦玉萍.超声波对电沉积泡沫铜结构及性能的影响[J].中国表面工程,2008,(1):45-47.
[15]  李忠全,周桂芬,陈木兰.多孔材料气体渗透性的测定[J].粉末冶金技术,1996,14(1);52-57.
[16]  LU T J,STONE H A,ASHBY M F.Heat transfer in open-cell metal foams[J].Acta mater,1998,10(46):3619-3635.
[17]  BHATTACHARYA A,MAHAJAN R L.Metal foam and finned metal foam heat sinks for electronics cooling in buoyancy-induced convection[J].Journal of Electronic Packaging,2006,3(128):259-266.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133