LI W Y,LIAO H,DOUCHY G,et al.Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder[J].Materials & Design,2007,28(7):2129-2137.
[5]
JODOIN B,RALETZ F,VARDELLE M.Cold spray modeling and validation using an optical diagnostic method[J].Surface and Coatings Technology,2006,200(14-15):4424-4432.
[6]
RICHER P,Z IGA A,YANDOUZI M,et al.CoNiCrAlY microstructural changes induced during cold gas dynamic spraying[J].Surface and Coatings Technology,2008,203(3-4):364-371.
[7]
GRUJICIC M,TONG C,DEROSSET W S,et al.Flow analysis and nozzle-shape optimization for the cold-gas dynamic-spray process[J].Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2003,217(11):1603-1613.
YOON S,KIM H J,LEE C.Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process[J].Surface and Coatings Technology,2006,200(20-21):6022-6029.
[13]
BALANI K,LAHA T,AGARWAL A,et al.Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating[J].Surface and Coatings Technology,2005,195(2-3):272-279.
