全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2011 

ZA73镁合金热变形行为研究

, PP. 73-77

Keywords: 变形行为,热模拟,镁合金,ZA合金,显微组织

Full-Text   Cite this paper   Add to My Lib

Abstract:

在应变速率为0.001s-1和0.1s-1、温度为150~300℃的条件下,采用热模拟对ZA73镁合金的高温拉伸变形行为进行了研究,并结合显微组织观察和挤压试验,分析确定了适合该合金的热加工工艺。结果表明变形温度和应变速率是影响ZA73合金流变应力和塑性的关键参数,应变速率一定时,流变应力随温度的增加而降低;温度一定时,流变应力随应变速率的提高而增加。低应变速率下,温度高于200℃塑性反而降低;高应变速率下,合金的塑性随着温度的增加而提高,但在250℃时塑性出现反常变化。在200~250℃范围内变形时,铸态枝晶网状组织特征消失,第二相化合物呈颗粒状弥散分布于基体中,尺寸明显细化;300℃变形时,低应变速率下合金组织明显粗大。细小第二相粒子增多和组织粗化导致合金热塑性降低。较高的应变速率和较高的温度有利于合金的热变形。在350℃和较高应变速率(约0.1s-1)下,挤压棒材的抗拉强度达355MPa,延伸率仍保持19%,晶粒尺寸细化至3~6μm。

References

[1]  BALASUBRAMANI N,SRINIVASAN A,PILLAI U T S,et al.Effect of antimony addition on the microstructure and mechanical properties of ZA84 magnesium alloy[J].Journal of Alloys and Compounds,2008,455(1-2):168-173.
[2]  ZHANG J.ZUO R L,CHEN Y X,et al.Microstructure evolution during homogenization of a-type Mg-Zn-Al alloy[J].Journal of Alloys and Compounds,2008,448(1-2):316-320.
[3]  ZHANG Z,COUTURE A,LUO A.An investigation of the properties of Mg-Zn-Al alloys[J].Scripta Materialia,1998,39(1):45-53.
[4]  OH-ISHI K,HONO K,SHIN K S.Effect of presaging and Al addition on age-hardening and microstructure in Mg-6 wt% Zn alloys[J].Materials Science and Engineering A,2008,496:425-433.
[5]  REN Y P,QIN G W,PEI W L,et al.The a-Mg solvus and isothermal section of Mg-rich comer in the Mg-Zn-Al ternary system at 320℃[J].Journal of Alloys and Compounds,2009,481(1-2):176-181.
[6]  ZHANG J,HE Q B,PAN F S,et al.Effects of erbium on the microstructure and mechanical properties of as-cast Mg-7Zn-3Al alloy[J].Transactions of Nonferrous Metals Society of China,2008,A01:22-26.
[7]  张静,潘复生.金属型铸造ZA73镁合金凝固特征和组织研究[J].材料热处理学报,2006,27(3):68-70.
[8]  KUBOTA K,MABUCHI M,HIGASHI K.Processing and mechanical properties of fine-grained magnesium alloys[J].Journal of Materials Science,1999,34(10):2255-2262.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133