FISEHER F D,REISNER G.WERNER E,et al.A new view on transformation induced plasticity[J]. International Journal of Plasticity,2000,16(7-8):723-748.
[2]
SUGINOTQ K,MASAHIRQ M,KOBAYASHI M,et al.Effects of second phase morphology on retained austenite morphology and tensile properties in a TRIP-aided dual-phase steel sheet[J].ISIJ Int:1993,33(7):775-782.
[3]
WANG X D,HUANG B X,WANG L,et al.The design and characterization of microalloying high-strength TRIP steels[J].Metall Mater Trans A,2008,39(1):1-7.
[4]
LIU S K,ZHANG J.The influence of the Si and Mn concentrations on the kinetics of the bainite transformation in Fe-C-Si-Mn alloys[J].Metallurgical and Materials Transactions A,1990,21(6):1517-1525.
[5]
DE MEYER M,VANDERSCHUEREN D,DE COOMAN B C.The influencc of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels iron steel[J].ISIJ Int,1999,39(8):813-822.
[6]
HASHIMOTO S,IKEDA S,SUGIMOTO K,et al.Effects of Nb and Mo addition to 0.2%C-1.5%Si-1.5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets[J].ISU Int,2004,44(9):1590-1598.
[7]
CHERKAOUI M,BERVEILLER M,LEMOINE X.Couplings between plasticity and martensitic phase transformation:overall behavior of polycrystalline TRIP steels[J].International Journal of Plasticity,2000,16(10-11):1215 1241.
[8]
TIMOKHINA I B,HODGSON P D,PERELOMA E V.Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels[J]. Metallurgical and Materials Transactions A,2004,95A(8):2331-2341.
[9]
李华瑞.材料X射线衍射分析实用方法[M].北京:冶金工业出版社,1994.39-78.
[10]
马世良.金属X射线衍射学[M].西安:西北工业大学出版社,1987.
[11]
HOLLOMON J H.The effect of heat treatment and carbon content on the work hardening characteristics of several steels[J].Trans of ASM,1944,32:123-133.
CHIRO A DI,ROOT J,YUE S.The effect of microstructure on the strain induced transformation of a Si-Mn bainite steel[A].37th MWSP Conf Proc[C] ].USA:ISS-AIME,1996.373-382.
[14]
ITAMI A,TAKAHASHI M,USIHIODA K.Plastic stability of retained austenite in the cold-rolled 0.14%C-1.9%Si-1.7% Mn sheet steel[J].ISIJ Int.1995,35(9):1121-1127.
