全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2012 

铸态Mg-4Al-4Si-0.75Sb合金的显微组织与力学性能

, PP. 36-41

Keywords: Mg-4Al-4Si-0.75Sb镁合金,Mg2Si相,显微组织,力学性能

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用重力铸造法制备Mg-4Al-4Si-0.75Sb(AS44-0.75Sb)(质量分数/%,下同)镁合金,研究铸态合金的显微组织和室温力学性能。结果表明铸态AS44-0.75Sb合金主要由α-Mg基体、β-Mg17Al12相、Mg2Si相和Mg3Sb2相组成;加入0.75Sb后形成高熔点的Mg3Sb2相,显著改善了Mg2Si相的形貌,使粗大的骨骼状Mg2Si转变为相对细小的汉字状Mg2Si。铸态合金的硬度HV为65.9,屈服强度为136.4MPa,抗拉强度为172.3MPa,伸长率为3.3%;拉伸断裂形式为准解理脆性断裂。

References

[1]  KWON Y-N, LEE Y S, LEE J H. Deformation behavior of Al-Mg-Si alloy at the elevated temperature[J]. Journal of Materials Processing Technology, 2007, 187-188:533-536.
[2]  FROES F H, ELIZER D, AGHION E. The science, technology and applications of magnesium[J]. JOM, 1998, 50(9): 30-34.
[3]  KAREL MILICKA, FERDINAND DOBES. Creep behaviour of a magnesium alloy AS21 and its fibre-strengthened composite[J]. Journal of Alloys and Compounds, 2004, 378(1-2): 167-171.
[4]  杨明波, 潘复生, 张静. Mg-Al系耐热镁合金的开发及应用[J]. 铸造技术, 2005, 26(4): 331-336.
[5]  王凤娥. 国内外镁合金材料专利的分析[J]. 轻合金加工技术,2006, 34(3): 7-9.
[6]  SRINIVASAN A, PILLAI U T S, PAI B C. Microstructure and mechanical properties of Si and Sb added AZ91 magnesium alloy[J]. Metallurgical and Materials Transactions A, 2005, 36(8): 2235-2239.
[7]  汪正保, 刘静, 袁泽喜. Sb对镁合金组织和力学性能的影响[J]. 特种铸造及有色合金, 2005, 25(9): 567-569.
[8]  张清, 李全安, 井晓天, 等. Sb合金化在耐热镁合金中的应用[J]. 材料工程,2009, (12): 80-83.
[9]  LIAO Li-hua, ZHANG Xiu-qing, WANG Hao-wei. Influence of Sb on damping capacity and mechanical properties of Mg2Si/Mg-9Al composite materials[J]. Journal of Alloys and Compounds, 2007, 430(1-2): 292-296.
[10]  SONG Chang-jiang, HAN Qing-you, ZHAI Qi-jie. Review of grain refinement methods for as-cast microstructure of magnesium alloy[J]. China Foundry, 2009, 6(3): 93-96.
[11]  黄明志. 金属力学性能[M]. 西安: 西安交通大学出版社, 1986. 28-55
[12]  ZHANG P. Creep behavior of the die-cast Mg-Al alloy AS21[J]. Scripta Materialia, 2005, 52(4): 275-279.
[13]  JIANG Q C, WANG HY, WANG Y. Modification of Mg2Si in Mg-Si alloys with yttrium[J]. Mater Sci Eng A, 2005, 392(1-2): 130-135.
[14]  DARGUSCH M S, BOWLES A L, PETTERSEN K. The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys[J]. Metallurgical and Materials Transactions A, 2004, 35(6): 1905-1912.
[15]  YUAN G Y, SUN Y S, DING W J. Effects of Sb addition on the microstructure and mechanical properties of AZ91 magnesium alloy[J]. Scripta Materialia, 2000, 43(11): 1009-1013.
[16]  杨景红, 田素贵, 于兴福, 等. 微量元素Sb对AZ31合金组织与蠕变性能的影[J]. 沈阳工业大学学报, 2005, 27 (3): 257-260.
[17]  马莹, 张忠明, 徐春杰, 等. Mg-15%Al-5%Si-0.5%Sb合金制备及其组织研究[J]. 铸造技术, 2006, 27(4): 357-359.
[18]  郑荣军, 井晓天, 卢正欣, 等. 锑含量对Mg-6Al-6Si合金组织性能的影响[J]. 铸造技术, 2007, 28(4): 512-514.
[19]  宋佩维, 郭学锋, 井晓天, 等. Sb对往复挤压态Mg-4Al-2Si合金组织和性能的影响[J]. 特种铸造及有色合金, 2007, 27(2): 88-91.
[20]  长崎诚三, 林平直. 二元合金状态图集[M]. 刘安生,译.北京:冶金工业出版社, 2004.201.
[21]  袁广银, 刘满平, 王渠东, 等. Mg-Al-Zn-Si合金的显微组织细化[J]. 金属学报, 2002, 38(10): 1105-1108.
[22]  宋佩维, 李虹燕, 王永善. 铸态Mg-4Al-2Si合金的显微组织与力学性能[J]. 材料工程, 2010, (1): 1-4.
[23]  胡德林. 三元合金相图及其应用[M]. 西安:西北工业大学出版社, 1982. 106-112.
[24]  LI Xin-lin, CHEN Yan-bin, WANG Xiang. Effect of cooling rates on as-cast microstructures of Mg-9Al-xSi(x=1,3)alloys[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(s2): 393-396.
[25]  张忠明, 徐春杰, 贾树卓, 等. 高硅含量镁铝硅合金的组织与力学性能[J]. 材料热处理学报,2009, 30(5): 140-146.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133