全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2012 

热波检测缺陷定量识别与图像重建研究

, PP. 39-46

Keywords: 红外热波检测,图像增强,图像分割,定量识别,图像重建

Full-Text   Cite this paper   Add to My Lib

Abstract:

基于红外热波方法对某型固体火箭发动机壳体含脱粘缺陷试件进行了数值仿真和实验研究。为了得到直观、精确的缺陷三维图像,采用同态滤波方法对原始图像进行降噪增强处理,利用粒子群模糊聚类算法对缺陷进行了分割,并对缺陷的大小和深度进行了定量识别,在此基础上,利用体绘制重建算法对缺陷进行三维重建。结果表明同态滤波方法信噪比高,图像增强效果好;粒子群模糊聚类算法分割效果好,缺陷保真性高;缺陷定量识别的精度较高,三维重建效果较好,为实现缺陷的自动识别奠定了基础。

References

[1]  GARNIER C, PASTOR M-L, EYMA F, et al. The detection of aeronautical defects in situ on composite structures using nondestructive testing [J]. Composite Structures, 2011, 93 (5): 1328-1336.
[2]  NIRANJAN D-V, KITE T D, GEISLER W S, et al. Image quality assessment based on a degradation model [J]. IEEE Transactions on Image Processing, 2000, 9(4):636-650.
[3]  AHMED M N, YAMANY S M, MOHAMED N. A modified fuzzy C-means algorithm for bias field estimation and segmentation of MRI data[J].IEEE Trans on Medical Imaging, 2002, 21(3): 193-195.
[4]  张德丰.MATLAB数字图像处理[M].北京: 机械工业出版社, 2009.285-286.
[5]  李涛,张乐,赵锴,等. 固体火箭发动机缺陷分析及其无损检测技术[J].无损检测,2006,28(10): 541-544.
[6]  李涛,成曙,张乐,等.固体火箭发动机高能X射线照相检测工艺参数的确定方法[J].制造技术研究,2010,(3):29-31.
[7]  袁红梅.粘结结构界面缺陷超声检测技术及其应用研究[D].北京:北京工业大学,2010.
[8]  GENEST M, MARTINEZ M, MRAD N, et al. Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs [J]. Composite Structures, 2009, 88 (1): 112-120.
[9]  CHAUVET F, CAZIN S, DURU P, et al. Use of infrared thermography for the study of evaporation in a square capillary tube [J]. International Journal of Heat and Mass Transfer, 2010, 53 (9-10): 1808-1818.
[10]  李晓霞,伍耐明,段玉霞,等.碳纤维层合板低速冲击后的红外热波检测分析[J].复合材料学报,2010,27(6):88-93.
[11]  李艳红,金万平,杨党纲,等.蜂窝结构的红外热波无损检测[J].红外与激光工程,2006,35(1): 45-48.
[12]  张晓燕.碳纤维、碳纤维复合材料的检测和研究[D].北京:首都师范大学,2008.
[13]  郑丽萍,李光耀,沙静.医学图像三维重建研究综述[A].第十一届中国体视学与图像分析学术年会论文集[C].北京:中国体视学学会,2006.533-536?/p>

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133