WISNOM M R, GIGLIOTTI M, ERSOY N, et al. Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures[J]. Composites Part A:Applied Science and Manufacturing,2006,37(4):522-529.
LI C, POTTER K, WISNOM M R, et al. In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method [J]. Composites Science and Technology,2004,64(1):55-64.
[5]
PARLEVLIET P P, BERSEE HEN, BEUKERS A. Shrinkage determination of a reactive polymer with volumetric dilatometry [J]. Polymer Testing,2010,29(4):433-439.
[6]
RADFORD D W. Cure shrinkage induced warpage in flat uni-axial composites [J]. Compos Technol Res,1993,15(4):290-296.
[7]
FLORES F, GILLESPIE Jr J W, BOGETTI T A. Experimental investigation of the cure-dependent response of vinyl ester resin [J]. Polym Eng Sci,2002,42(3):582-590.
ANTONUCCI V, CUSANO A, GIORDANO M, et al. Cure-induced residual strain build-up in a thermoset resin [J]. Composites Part A: Applied Science and Manufacturing,2006,37(4):592-601.
PARLEVLIET P P, BERSEE H E N, BEUKERS A. Measurement of (post-)curing strain development with fibre Bragg gratings[J]. Polymer Testing,2010,29(3):291-301.
[12]
MULLER M, COLLOMBET F, OLIVIER P, et al. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, part I: elementary specimen [J]. Composites Part A:Applied Science and Manufacturing,2009,40(1):94-104.
[13]
OLIVEIRA R DE, LAVANCHY S, CHATTON R, et al. Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing[J]. Composites Part A,2008,39(7):1083-1090.
[14]
GIORDANO M, LAUDATI A, NASSER J, et al. Monitoring by a single fiber Bragg grating of the process induced chemo-physical transformations of a model thermoset [J]. Sensors and Actuators A:Physical,2004,113(2):166-173.
