LUO Jiao,LI Miao-quan,LI Hong,et al. Effect of the strain on the deformation behavior of isothermally compressed Ti-6Al-4V alloy[J].Mater Sci & Eng A,2009,505(1-2):88-95.
[2]
王洪,付高峰,孙继红,等.超高强铝合金研究进展 [J]. 材料导报,2006,20(2):58-60.WANG Hong,FU Gao-feng,SUN Ji-hong,et al.Present research and developing trends of ultra high strength aluminum alloys[J].Materials Review,2006,20(2):58-60.
[3]
CASSADA W, LIU J, STALEY J. Aluminum alloys for aircraft structures[J]. Adv Mater Proc, 2002, 160(12):27-32.
[4]
BOZZINI B,CERRI E. Numerical reliability of hot working processing maps[J]. Materials Science and Engineering A,2002,328(1-2):344-347.
[5]
PRASAD Y V R K,SASIDHARA S.Hot Working Guide:a Compendium of Processing Maps[M].Materials Park:ASM International,1997.
[6]
LI Miao-quan,ZHANG Wei-fu. Effect of hydrogen on processing maps in isothermal compression of Ti-6Al-4V titanium alloy[J].Mater Sci & Eng A,2009,502(1-2):32-37.
[7]
肖梅,周正,黄光杰,等.AZ31镁合金的热变形行为及加工图[J].机械工程材料,2010,34(4):18-21.XIAO Mei,ZHOU Zheng,HUANG Guang-jie,et al.Hot deformation behavior and processing maps of AZ31 magnesium alloy[J].Materials of Mechanical Engineering,2010,34(4):18-21.
[8]
刘娟,崔振山,李从心.镁合金ZK60的三维加工图及失稳分析[J].中国有色金属学报,2008,18(6):1020-1026.LIU Juan,CUI Zhen-shan,LI Cong-xin.Three-dimensional processing maps and flow instability of magnesium alloys ZK60[J].The Chinese Journal of Nonferrous Metals,2008,18(6):1020-1026.
[9]
宁永权,姚泽坤,傅明旺,等.基于热加工图研究粉末高温合金的热变形行为[J].稀有金属材料与工程,2010,39(S1):231-234.NING Yong-quan,YAO Ze-kun,FU Ming-wang,et al.Study on hot deformation behavior of P/M superalloy using processing map[J].Rare Metal Materials and Engineering, 2010,39(S1):231-234.
[10]
熊毅,熊良银,张凌峰,等.GH4199合金的热变形行为与微观组织演变[J].中国有色金属学报,2010,20(4):655-661. XIONG Yi,XIONG Liang-yin,ZHANG Ling-feng,et al.Hot deformation behavior and microstructure evolution of superalloy GH4199[J]. The Chinese Journal of Nonferrous Metals, 2010,20(4):655-661.
[11]
SERAJZADEH S. Modeling flow stress behavior of aluminum alloys during hot rolling[J]. Materials Science and Technology, 2006,22(6):713-718.
[12]
李俊鹏,沈健,许小静,等.7050高强铝合金高温塑性变形的流变应力研究[J].稀有金属,2009,33(3):318-322. LI Jun-peng,SHEN Jian,XU Xiao-jing,et al.Flow stress of 7050 high strength aluminum alloy during high temperature plastic deformation[J].Chinese Journal of Rare Metals, 2009,33(3):318-322.
[13]
王亮,李惠曲,陈慧琴,等.Al-Zn-Mg-Cu合金热压缩流变应力行为及组织演变[J].锻压技术,2010,35(4):133-136. WANG Liang,LI Hui-qu,CHEN Hui-qin,et al.Flow stress behavior and microstructure evolution of Al-Zn-Mg-Cu alloy during hot compression deformation[J]. Forging & Stamping Technology, 2010,35(4):133-136.
[14]
张坤,李惠曲,陈慧琴,等. Al-Zn-Mg-Cu新型高强铝合金热变形组织演变机理和规律[J]. 轻合金加工技术,2010,38(10):55-58. ZHANG Kun,LI Hui-qu,CHEN Hui-qin,et al.Microstructure mechanisms and evolution during hot deformation of a new Al-Zn-Mg-Cu high strength aluminum alloy[J].Light Alloy Fabrication Technology, 2010,38(10):55-58.
[15]
臧金鑫,郑林斌,张坤,等. 新型超高强Al-Zn-Mg-Cu铝合金热压缩变形的流变应力行为[J].航空材料学报,2011,31(3):35-38. ZANG Jin-xin,ZHENG Lin-bin,ZHANG Kun,et al.Flow stress behavior of a new high strength Al-Zn-Mg-Cu alloy during hot compression deformation[J].Journal of Aeronautical Materials, 2011,31(3):35-38.
[16]
McQUEEN H J.Development of dynamic recrystallization theory[J]. Materials Science and Engineering A,2004,387-389:203-208.
