赵宪明,吴迪,陈学军.60Si2Mn钢动态再结晶数学模型的实验研究[J].钢铁研究学报,2003,15(5):32-34.ZHAO Xian-ming, WU Di, CHEN Xue-jun. Experimental research on mathematical model of dynamic recrystallization for 60Si2Mn Steel [J]. Journal of Iron and Steel Research, 2003, 15(5): 32-34.
[2]
程晓茹,李虎兴.管线钢X65高温变形动态再结晶研究[J].金属学报,1997,33(12):1275-1281.CHENG Xiao-ru, LI Hu-xing. Dynamic recrystallization of steel X65 during high temperature deformation [J].Acta Metallurgica Sinica, 1997,33(12):1275-1281.
[3]
刘宁,王立民, 陈礼清, 等.403Nb钢高温热压缩变形条件下的流变应力研究[J].塑性工程学报,2008,15(3):114-118.LIU Ning, WANG Li-min, CHEN Li-qing, et al. Investigation on flow stress of 403Nb steel during hot compression [J]. Journal of Plasticity Engineering, 2008, 15(3): 114-118.
[4]
SALEHI A R, TAHERI A K. Flow behavior and microstructural evolution of 53Fe-26Ni-15Cr superalloy during hot compression test[J].Ironmaking and Steelmaking,2007,34(2):151-156.
[5]
STEWARD G R, ELWAZRI A M, YUE S, et al. Modeling of dynamic recrystallization kinetics in austenitic stainless and hypereutectoid steels[J].Materials Science and Technology,2006,22(5):519-524.
[6]
DEHGHAN-MANSHADI A, BARNETT M R, HODGSON P D. Microstructural evolution during hot deformation of duplex stainless steel[J].Materials Science and Technology,2007,23(12):1478-1484.
[7]
PRASAD Y V R K, GEGEL H L,DORAIVELU S M. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242[J].Metallurgical and Materials Transactions A,1984, 15(10): 1883-1892.
[8]
PRASAD Y V R K, RAO K P. Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: anisotropy of hot workability[J].Materials Science and Engineering A,2008,487(1):316-327.
[9]
SRINIVASAN N, PRASAD Y V R K. Microstructural control in hot working of IN-718 superalloy using processing map[J].Metallurgical and Materials Transactions A,l994, 25(10):2275-2284.
[10]
韩德伟,张建新.金相试样制备与显示技术[M].长沙:中南大学出版社,2005.156-158.
[11]
ZENER C, HOLLOMON J H. Effect of strain rate upon the plastic flow of steel[J].Journal of Applied Physics,1944,15(1):22-32.
[12]
李宏明,马巧红.核电及核电用钢的发展[J].世界钢铁, 2007,(2):70-72.LI Hong-ming, MA Qiao-hong. The development of nuclear power and the nuclear power steel [J].World Iron & Steels, 2007, (2): 70-72.
[13]
SELLARS C M, TEGART W J M. On the mechanism of hot deformation[J].Acta Metallurgica,1966,14(9):1136-1138.
SRINIVASAN N, PRASAD Y V R K. Hot working characteristics of nimonic75, 80A and 90 superalloys: a comparison using processing maps[J].Journal of Materials Processing Technology,1995,51(1):171-192.
