全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2013 

涂层疲劳损伤声发射特征参数及损伤机理

DOI: 10.3969/j.issn.1001-4381.2013.06.009

Keywords: 铁基合金涂层,接触疲劳,损伤机理,声发射特征参数

Full-Text   Cite this paper   Add to My Lib

Abstract:

使用超音速等离子喷涂设备在1045钢基体上制备了铁基合金涂层。以球盘式接触疲劳试验机为平台,研究了涂层接触疲劳损伤过程中声发射特征参数的变化规律,并分析了涂层的接触疲劳损伤机理。结果表明,在转速为2500r/min和应力水平为1.58GPa实验条件下,点蚀是涂层的主要失效形式,表现为在涂层磨痕轨迹范围内出现大量的点蚀坑,点蚀坑深度为20~30μm。涂层表面粗糙的微凸体与轴承球滚压接触产生黏着磨损,以及涂层、磨粒、滚动轴承三者形成三体磨料磨损是点蚀失效产生的主要原因。声发射幅值、有效值(RootMeanSquare,RMS)、能量、计数和平均频率对涂层表面粗糙微凸体去除、弹塑性变形、裂纹萌生、裂纹稳定扩展和失稳扩展过程比较敏感,并且在不同的疲劳损伤阶段具有不同的信号反馈特点。

References

[1]  WARREN A W, GUO Y B. Acoustic emission monitoring for rolling contact fatigue of superfinished ground surfaces[J]. International Journal of Fatigue, 2007, 29(4): 603-614.
[2]  PIAO Z Y, XU B S, WANG H D, et al. Investigation of fatigue prediction of Fe-Cr alloy coatings under rolling contact based on acoustic emission technique[J]. Applied Surface Science, 2011, 257(7): 2581-2586.
[3]  ZHANG Z Q, LI G L, WANG H D, et al. Investigation of rolling contact fatigue damage process of the coating by acoustics emission and vibration signals[J]. Tribology International, 2012, 47: 25-31.
[4]  MIGUEL J M, GUILEMANY J M, MELLOR B G. Acoustic emission study on WC-Co thermal sprayed coatings[J]. Materials Science and Engineering:A, 2003, 352(1-2): 55-63.
[5]  徐滨士. 再制造工程基础及应用[M]. 哈尔滨: 哈尔滨工业大学出版社, 2005.
[6]  王韶云, 李国禄, 王海斗. 微缺陷对热喷涂涂层接触疲劳性能的影响[J]. 材料工程, 2012, (2): 72-76.WANG Shao-yun,LI Guo-lu,WANG Hai-dou,et al.Influence of microdefect of rolling contact fatigue performance of thermal spraying coating[J].Journal of Materials Engineering,2012,(2):72-76.
[7]  ZHU S, XU B S, YAO J K. High quality ceramic coatings sprayed by high efficiency hypersonic plasma spraying gun[J]. Material Science Forum, 2005, 475-479: 3981-3984.
[8]  朴钟宇, 徐滨士, 王海斗, 等. 等离子喷涂铁基涂层的接触疲劳失效机理研究[J]. 材料工程, 2009,(11): 69-73.PIAO Zhong-yu,XU Bin-shi,WANG Hai-dou,et al.Investigation of contact fatigue mechanism of plasma spraying Fe-based coating[J].Journal of Materials Engineering,2009,(11):69-73.
[9]  TAN C K, MBA D. Identification of the acoustic emission source during a comparative study on diagnosis of a spur gearbox[J]. Tribology International, 2005, 38(5): 469-80.
[10]  MERIAUX J, BOINET M. Identification of fretting fatigue crack propagation mechanisms using acoustic emission[J]. Tribology International, 2010, 43(11): 2166-2174.
[11]  MBA D. Development of acoustic emission technology for condition monitoring and diagnosis of rotating machines; bearings, pumps, gearboxes, engines and rotating structures[J]. Shock Vib Dig, 2006, 38(1): 3-16.
[12]  KHAMIS R, BALUSHI A L, ADDALI A. Energy index technique for detection of acoustic emissions associated with incipient bearing failures[J]. Applied Acoustics, 2010, 71(9): 812-821.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133