梁强,陈希春,任昊,等.电流对GH4169合金电渣重熔凝固过程参数影响的数值模拟研究[J].航空材料学报,2012,32(3),29-34.LIANG Qiang,CHEN Xi-chun,REN Hao,et al.Numerical simulation researches influence of current on solidification process parameters of GH4169 in electroslag remelting process[J].Journal of Aeronautical Materials,2012,32(3):29-34.
[2]
付锐, 陈希春, 任昊,等. 电渣重熔连续定向凝固René88DT合金的组织与热变形行为[J]. 航空材料学报,2011,31(6):8-13.FU Rui,CHEN Xi-chun,REN Hao, et al. Study on the as-cast microstructure and deformation behavior of ESR-CDS René88DT alloy[J]. Journal of Aeronautical Materials, 2011,31(6):8-13.
[3]
MA De-xin,GRAFE U. Microsegregation in directionally solidified dendritic-cellular structure of superalloy CMSX-4[J]. Materials Science and Engineering.A,1999,270(2):339-342.
[4]
ZHOU Y Z,VOLEK A.Effect of dendrite arm spacing on castability of a directionally solidified nickel alloy[J]. Scripta Materialia,2007,56(6):537-540.
[5]
朱耀宵. 低偏析高温合金[J]. 金属热处理学报,1997,18(3):16-22.ZHU Yao-xiao. Low segregation superalloys[J]. Transactions of Metal Heat Treatment, 1997,18(3):16-22.
[6]
周雪峰,方峰,蒋建清,等. 高速钢M2中共晶碳化物M2C的性质和形态[J], 钢铁,2009,(9):76-80.ZHOU Xue-feng,FANG Feng,JIANG Jian-qing, et al. Study on property and morphology of M2C eutectic carbides in M2 high speed steel[J]. Iron and Steel,2009,(9):76-80.
[7]
陈希春,付锐,任昊,等. 电渣重熔连续定向凝固FGH96合金非金属夹杂物研究[J]. 中国新技术新产品,2011,(10):1-2.CHEN Xi-chun, FU Rui,REN Hao, et al. Study on nonmetallic inclusions of ESR-CDS FGH96 alloy[J]. China New Technologies and Products, 2011,(10):1-2.
[8]
PAYSON P. The Metallurgy of Tool Steels[M]. New York: John Wiley and Sons Inc,1962.187-196.
[9]
LESKOVSEK V,VlE B.Improved vacuum heat-treatment for fine-blanking tools from high-speed steel M2[J]. Materials Processing Technology,1998,82:89-94.
[10]
FU H G,QIANG X,XING J D.A study on the crack control of a high-speed steel roll fabricated by a centrifugal casting technique[J].Materials Science and Engineering A,2008,474(1-2):82-87.
[11]
BERGMAN F,HEDENQVIST P,HOGMARK S.The influence of primary carbides and test parameters on abrasive and erosive wear of selected PM high speed steels[J]. Tribology International,1997,30(3):183-191.
[12]
FREDRIKSSON H,BRISING S.The formation of carbides during solidification of high speed steels [J]. Scandinavian Journal of Metallurgy,1976,5(6):268-275.
