FARRAHI G H, TIREHDAST M, MASOUMI KHALIL ABAD E, et al. Failure analysis of a gas turbine compressor[J]. Engineering Failure Analysis,2011,18(1):474-484.
[2]
马小明, 胡林星. 高速离心式压缩机叶片断裂失效分析[J]. 理化检验-物理分册,2011,(8):527-533.MA Xiao-ming, HU Lin-xing. Failure analysis on fracture of impeller blades of high-speed centrifugal aircompressor [J]. Part A: Phys Test,2011,(8):527-533.
[3]
支金花, 张海存, 卢正欣, 等. 轴流压缩机叶片断裂分析[J]. 流体机械,2011,(2):47-51.ZHI Jin-hua, ZHANG Hai-cun, LU Zheng-xin, et al. Failure analysis on blades in axial compressor[J]. Fluid Machinery,2011,(2):47-51.
[4]
LUCJAN WITEK. Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigue[J]. Engineering Failure Analysis,2011,18(4):1223-1232.
[5]
TROSHCHENKO V T, PROKOPENKO A V. Fatigue strength of gas turbine compressor blades[J]. Engineering Failure Analysis,2000,(7):209-220.
[6]
XI N S, ZHONG P D, HUANG H Q, et al. Failure investigation of blade and disk in first stage compressor[J]. Engineering Failure Analysis,2000,(7):385-392.
[7]
SIVAPRASAD S, NARASAIAH N, DAS S K, et al. Investigation on the failure of air compressor[J]. Engineering Failure Analysis,2010,17(1):150-157.
[8]
INFANTE V, SILVA J M, FREITAS DE M. Failures analysis of compressor blades of aeroengines due to service[J]. Engineering Failure Analysis,2009,16(4):1118-1125.
[9]
钟群鹏, 赵子华. 断口学[M]. 北京:高等教育出版社,2006.
[10]
BERGER C, KAISER B. Results of very high cycle fatigue tests on helical compression springs[J].International Journal of Fatigue,2006,28 (11):1658-1663.
[11]
LEE BOK-WON, SUH JUNGJUN, HONGCHUL LEE, et al. Investigations on fretting fatigue in aircraft engine compressor blade[J]. Engineering Failure Analysis,2011,18(7):1900-1908.
[12]
CHAPETTI M D, TAGAWA T, MIYATA T. Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure[J]. Materials Science and Engineering:A,2003,356(1-2):227-235.
[13]
HSU KUEI-CHANG, LIN CHIH-KUANG. Effects of R-ratio on high-temperature fatigue crack growth behavior of a precipitation-hardening stainless steel[J]. International Journal of Fatigue,2008,30(12):2147-2155.
[14]
YOSHIYUKI FURUYA. Notable size effects on very high cycle fatigue propertiesof high-strength steel[J]. Materials Science and Engineering:A,2011,528(15):5234-5240.
[15]
WANG Q Y, BATHIAS C, KAWAGOISHI N, et al. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength[J]. International Journal of Fatigue,2002,24(12):1269-1274.
[16]
CHAPETTI M D, TAGAWA T, MIYATA T. Ultra-long cycle fatigue of high-strength carbon steels part II: estimation of fatigue limit for failure from internal inclusions[J]. Materials Science and Engineering:A,2003,356(1-2):236-244.
[17]
CHAPETTI M D. Prediction of threshold for very high cycle fatigue (N>107cycles)[J]. Procedia Engineering,2010,2(1):257-264.
[18]
ZHANG J M, LI S X, YANG Z G, et al. Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime[J]. International Journal of Fatigue,2007,29(4):765-771.
[19]
TAIZO MAKINO. The effect of inclusion geometry according to forging ratio and metal flow direction on very high-cycle fatigue properties of steel bars[J].International Journal of Fatigue,2008,30(8):1409-1418.
[20]
刘昆鹏, 有移亮, 张珊, 等. 50CrVA 扭杆断裂原因分析[J]. 材料工程,2010,(8):5-7. LIU Kun-peng, YOU Yi-liang, ZHANG Shan, et al. Fracture analysis of 50CrVA torsion bar[J]. Journal of Materials Engineering,2010,(8):5-7.
[21]
邓忠, 孔凡亚. 1Cr18Ni10Ti不锈钢疲劳性能研究[J]. 飞机设计,2002,(2):66-72. DENG Zhong, KONG Fan-ya. Study of characteristic of 1Cr18Ni10Ti stainless steel and pipe[J]. Aircraft Design,2002,(2):66-72.
[22]
LUCJAN WITEK. Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigue[J]. Engineering Failure Analysis,2011,18(4):1223-1232.
[23]
ZHANG Da-yi, HONG Jie, MA Yan-hong, et al. A probability method for prediction on high cycle fatigue of blades caused by aerodynamic loads[J]. Advances in Engineering Software, 2011,42(12):1059-1073.
[24]
OZBAYSAL K, INAL O T. Age-hardening kinetics and microstructure of PH15-5 stainless steel after laser melting and solution treating[J]. Journal of Materials Science,1994,29(6):1471-1480.
[25]
MIRZADEH H, NAJAFIZADEH A. Aging kinetics of 17-4 PH stainless steel[J]. Materials Chemistry and Physics,2009,116(1):119-124.
[26]
HABIBI BAJGUIRANI H R, SERVANT C, CIZERON G. TEM investigation of precipitation phenomena occurring in PH 15-5 alloy[J]. Acta Metallurgica et Materialia,1993,41(5):1613-1623.
