GUILLET A, NZOMA E Y, PAREIGE P. A new processing technique for copper-graphite multifilamentary nanocomposite wire:microstructures and electrical properties[J]. Journal of Materials Processing Technology,2007,182(1-3):50-57.
[2]
GARCIA-MARQUEZ J M, ANTON N, JIMENEZ A, et al. Viability study and mechanical characterisation of copper-graphite electrical contacts produced by adhesive joining[J]. Journal of Materials Processing Technology,2003,143-144:290-293.
[3]
TARASI F, MEDRAJ M, DOLATABADI A, et al. Structural considerations in plasma spraying of the alumina-zirconia composite[J]. Surface & Coatings Technology,2011,205(23-24):5437-5443.
[4]
ZHANG X, VITCHEV R G, LAUWERENS W, et al. Effect of crystallographic orientation on fretting wear behavior of MoS2 coatings in dry and humid air[J]. Thin Solid Films,2001,396(1-2):69-77.
[5]
SONG J P,VALEFI M, ROOIJ M D, et al. The effect of an alumina counterface on friction reduction of CuO/3Y-TZP composite at room temperature[J]. Wear,2012,274-275:75-83.
[6]
周庆生. 等离子喷涂技术[M]. 南京:江苏科学技术出版社,1982.18-20.
[7]
易德亮, 冶银平, 刘光, 等. 离子喷涂Al2O3-30%TiO2微米/纳米复合涂层的结构与耐磨性能[J]. 材料工程,2012,(5):24-29. YI De-liang, YE Yin-ping, LIU Guang, et al. Structure and wear properties of plasma sprayed Al2O3-30%TiO2 micro/nano-composite coatings[J]. Journal of Materials Engineering,2012,(5):24-29.
[8]
栗卓新, 祝弘滨, 李辉, 等. 热喷涂金属陶瓷复合涂层研究进展[J]. 材料工程,2012,(5):93-96. LI Zhuo-xin, ZHU Hong-bin, LI Hui, et al. Progress of thermal spray cermet coatings[J]. Journal of Materials Engineering,2012,(5):93-96.
[9]
HYUNG-SEOP S, JUNG-SOO P, YOON-CHUL J,et al. Similar and dissimilar friction welding of Zr-Cu-Al bulk glassy alloys[J]. Journal of Alloys and Compounds,2009,483(1-2):182-185.
[10]
SAEED A, ARMAN Z, AKBARI A. The effect of sliding speed and amount of loading on friction and wear behavior of Cu-0.65 wt.%Cr alloy [J]. Journal of Alloys and Compounds,2009,486(1-2):319-324.
[11]
KOVáCIK J, EMMER ？, BIELEK J, et al. Effect of composition on friction coefficient of Cu-graphite composites[J]. Wear,2008,265(3-4):417-421.
[12]
EQUEY S, HOURIET A, MISCHLER S. Wear and frictional mechanisms of copper-based bearing alloys[J].Wear,2011,273(1):9-16.
[13]
YASAR I, CANAKCI A, ARSLAN F. The effect of brush spring pressure on the wear behavior of copper-graphite brushes with electrical current[J]. Tribology International,2007,40(9):1381-1386.
[14]
MESGARNEJAD A, KHONSARI M M. On the tribological behavior of MoS2-coated thrust ball bearings operating under oscillating montion[J]. Wear,2010,269(7-8):547-556.
[15]
NAFUMI HIRAOKA. Wear life mechanism of journal bearings with bonded MoS2 film lubricants in air and vacuum[J]. Wear,2001,249(10-11):1014-1020.
[16]
REZAEI H, LIU X B, ARDAKANI S J, et al. A study of cold lake vacuum residue hydroconversion in batch and semi-batch reactors using unsupported MoS2 catalysts[J]. Catalysis Today,2010,150(3-4):244-254.
[17]
TAGAWA M, YOKOTA K, MATSUMOTO K, et al. Space environmental effects on MoS2 and diamond-like carbon lubricating films: atomic oxygen-induced erosion and its effect on tribological properties[J]. Surface & Coatings Technology,2007,202(4-7):1003-1010.
[18]
JAYARAMA G, DORAISWAMYA N, MARKSA L D, et al. Ultrahigh vacuum high resolution transmission electron microscopy of sputter-deposited MoS2 thin films[J]. Surface & Coatings Technology,1994,68-69:439-445.
[19]
COLMENARES-ANGULOA J, ZHAO S, YOUNG C, et al. The effects of thermal spray technique and post-deposition treatment on the photocatalytic activity of TiO2 coatings[J]. Surface & Coatings Technology,2009,204(4):423-427.
[20]
张志强, 李国禄, 王海斗, 等. 等离子喷涂Fe基合金涂层组织及接触疲劳损伤性能的研究[J]. 材料工程,2012,(6):59-62. ZHANG Zhi-qiang, LI Guo-lu, WANG Hai-dou, et al. Study on the microstructure and property of contact fatigue damage of plasma-sprayed Fe-based alloy coating[J]. Journal of Materials Engineering,2012,(6):59-62.
[21]
齐尚奎, 赵家政, 党鸿辛. MoS2与金属表面摩擦后生成转移膜的研究-Ⅱ. MoS2转移膜与钢摩擦时的化学效应[J]. 固体润滑,1983,3(4):199-204. QI Shang-kui, ZHAO Jia-zheng, DANG Hong-xin.A study of transfer films in the friction of MoS2-metal surfaces II. chemical reaction between steel and rubbed transfer film[J].Journal of Solid Lubrication,1983,3(4):199-204.
