全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2013 

冷喷涂制备复合材料涂层研究现状

DOI: 10.3969/j.issn.1001-4381.2013.08.001, PP. 1-10

Keywords: 冷喷涂,复合粉末,工艺参数,复合材料涂层

Full-Text   Cite this paper   Add to My Lib

Abstract:

鉴于目前冷喷涂技术制备复合材料涂层受到国内外越来越多学者的关注,本文在大量文献分析的基础上对冷喷涂制备复合材料涂层进行了分类和总结。首先,探讨了喷涂前粉末准备和喷涂工艺参数对复合材料涂层的影响;其次,归纳了冷喷涂制备的金属-金属、金属-陶瓷、金属-金属间化合物以及纳米复合材料涂层等研究成果;最后,分析了冷喷涂制备复合材料涂层的应用前景和当前存在的主要问题。

References

[1]  LUO X T, YANG G J, LI C J, et al. High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact[J]. Scripta Mater,2011,65(7):581-584.
[2]  PHANI P S, VISHNUKANTHAN V, SUNDARARAJAN G. Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings[J]. Acta Mater,2007,55(14):4741-4751.
[3]  黄春杰, 李文亚, 余敏, 等. 冷喷涂制备颗粒增强钛基复合材料涂层研究[J]. 材料工程,2013,(4):1-5. HUANG C J, LI W Y, YU M, et al. Investigation on particles reinforced titanium matrix composite coating fabricated by cold spraying[J]. Journal of Materials Engineering,2013,(4):1-5.
[4]  STOLTENHOFF T, KREYE H, RICHTER H J. An analysis of the cold spray process and its coatings[J]. J Therm Spray Techn,2002,11(4):542-550.
[5]  EESLEY L G, ELMOURSI A, PATEL N. Thermal properties of kinetic spray Al-SiC metal-matrix composite[J]. J Mater Res, 2003,18(4):855-860.
[6]  LI W Y, ZHANG G, LIAO H, et al. Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating[J]. J Mater Process Tech,2008,202(1-3):508-513.
[7]  ZHOU X L, MOU S J, WU X K, et al. Deposition behavior of mixed binary metallic powders in cold spraying process[J]. Appl Surf Sci,2011,257(24):10628-10633.
[8]  WANG Q, SPENCER K, BIRBILIS N, et al. The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate[J]. Surf Coat Tech,2010,205(1):50-56.
[9]  TAO Y S, XIONG T Y, SUN C, et al. Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy[J]. Appl Surf Sci,2009,256(1):261-266.
[10]  NOVOSELOVA T, CELOTTO S, MORGAN R, et al. Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits[J]. J Alloy Compd,2007,436(1-2):69-77.
[11]  YU M, LI W Y, SUO X K, et al. Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings[J]. Surf Coat Tech,2013,220:102-106.
[12]  POIRIER D, LEGOUX J G, DREW R A L, et al. Consolidation of Al2O3/Al nanocomposite powder by cold spray[J]. J Therm Spray Techn,2011,20(1-2):275-284.
[13]  WANG H T, LI C J, YANG G J, et al. Cold spraying of Fe/Al powder mixture: coating characteristics and influence of heat treatment on the phase structure[J]. Appl Surf Sci,2008,255(5):2538-2544.
[14]  TRIA S, ELKEDIM O, LI W Y, et al. Ball milled Ni-Ti powder deposited by cold spraying[J]. J Alloy Compd,2009,483(1-2):334-336.
[15]  LI W Y, ZHANG G, ZHANG C, et al. Effect of ball milling of feedstock powder on microstructure and properties of TiN particle-reinforced Al alloy-based composites fabricated by cold spraying[J]. J Therm Spray Techn,2008,17(3):316-322.
[16]  LI W Y, ZHANG C, LIAO H, et al. Characterizations of cold-sprayed nickel-alumina composite coating with relatively large nickel-coated alumina powder[J]. Surf Coat Tech,2008,202(19):4855-4860.
[17]  BAKSHI S R, SINGH V, BALANI K, et al. Carbon nanotube reinforced aluminum composite coating via cold spraying[J]. Surf Coat Tech,2008,202(21):5162-5169.
[18]  FENG C, GUIPONT V, JEANDIN M, et al. B4C/Ni composite coatings prepared by cold spray of blended or CVD-coated powders[J]. J Therm Spray Techn,2012,21(3-4):561-570.
[19]  DEFORCE B S, EDEN T J, POTTE J K, et al. Cold spray Al-5%Mg coatings for the corrosion protection of magnesium alloys[J]. J Therm Spray Techn,2011,20(6):1352-1358.
[20]  KIM J S, KWON Y S, LOMOVSKY O I, et al. Cold spraying of in situ produced TiB2-Cu nanocomposite powders[J]. Compos Sci Technol,2007,67(11-12):2292-2296.
[21]  RICHER P, JODOIN B, AJDELSZTAJN L, et al. Substrate roughness and thickness effects on cold spray nanocrystalline Al-Mg coatings[J]. J Therm Spray Techn,2006,15(2):246-254.
[22]  KANG H K, KANG S B. Tungsten/copper composite deposits produced by a cold spray[J]. Scripta Mater,2003,49(12):1169-1174.
[23]  高培虎, 杨冠军, 李毅功, 等. 粉末结构对冷喷涂纳米结构WC-Co沉积行为的影响[J]. 中国表面工程,2009,22(5):56-61. GAO P H, YANG G J, LI Y G, et al. Influence of powder porous structure on the deposition behavior of cold sprayed nano-structured WC-Co coatings[J]. China Surface Engineering,2009,22(5):56-61.
[24]  LI C J, YANG G J, GAO P H, et al. Characterization of nanostructured WC-Co deposited by cold spraying[J]. J Therm Spray Techn,2007,16(5-6):1011-1020.
[25]  KIM H J, LEE C H, HWANG S Y. Fabrication of WC-Co coatings by cold spray deposition[J]. Surf Coat Tech,2005,191(2-3):335-340.
[26]  KIM H J, LEE C H, HWANG S Y. Superhard nano WC-12%Co coating by cold spray deposition[J]. Mat Sci Eng:A,2005,391(1-2):243-248.
[27]  SHIN S M, YOON S H, KIM Y D, et al. Effect of particle parameters on the deposition characteristics of a hard/soft-particles composite in kinetic spraying[J]. Surf Coat Tech,2006,201(6):3457-3461.
[28]  SPENCER K, ZHANG M X. The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment[J]. Surf Coat Tech,2009,203(20-21):3019-3025.
[29]  WU X K, ZHOU X L, CUI H, et al. Deposition behavior and characteristics of cold-sprayed Cu-Cr composite deposits[J]. J Therm Spray Techn,2012,21(5):792-799.
[30]  ROLLAND G, SALLAMAND P, GUIPONT V, et al. Damage study of cold-sprayed composite materials for application to electrical contacts[J]. J Therm Spray Techn,2012,21(5):758-772.
[31]  LI J F, AGYAKWA P A, JOHNSON C M, et al. Characterization and solderability of cold sprayed Sn-Cu coatings on Al and Cu substrates[J]. Surf Coat Tech,2010,204(9-10):1395-1404.
[32]  周勇, 杨冠军, 王洪铎, 等. 热处理对机械合金化Ni/Ti冷喷涂层金属间化合物形成的影响[J]. 焊接学报,2010,31(8):45-48. ZHOU Y, YANG G J, WANG H D, et al. Effect of annealing treatment on formation of intermetallic phase in cold-sprayed Ni/Ti mechanical alloying coating[J]. Transactions of the China Welding Institution,2010,31(8):45-48.
[33]  NOVOSELOVA T, FOX P, MORGAN R, et al. Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray[J]. Surf Coat Tech,2006,200(8):2775-2783.
[34]  IRISSOU E, LEGOUX J G, ARSENAULT B, et al. Investigation of Al-Al2O3 cold spray coating formation and properties[J]. J Therm Spray Techn,2007,16(5-6):661-668.
[35]  HODDER K J, IZADI H, MCDONALD A G, et al. Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing[J]. Mat Sci Eng:A,2012,556:114-121.
[36]  LI W Y, ZHANG G, GUO X P, et al. Characterizations of cold-sprayed TiN particle-reinforced Al alloy-based composites-from structures to tribological behaviour[J]. Adv Eng Mater,2007,9(7):577-583.
[37]  BU H Y, YANDOUZI M, LU C, et al. Cold spray blended Al+Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy[J]. Surf Coat Tech,2012,207:155-162.
[38]  SPENCER K, FABIJANIC D M, ZHANG M X. The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys[J]. Surf Coat Tech,2009,204:336-344.
[39]  PAPYRIN A. Cold spray technology[J]. Adv Mater Process,2001,159(9):49-51.
[40]  ALKIMOV A P, KOSAREV V F, PAPYRIN A N. A method of cold gas dynamic deposition[J]. Dold Akad Nauk SSSR,1990,315(5):1062-1065.
[41]  LI C J, LI W Y. Optimal design of a novel cold spray gun nozzle at a limited space[J]. J Therm Spray Techn,2005,14(3):391-395.
[42]  LI W Y, LIAO H, DOUCHY G, et al. Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder[J]. Mater Des,2007,28(7):2129-2137.
[43]  KLINKOV S V, KOSAREV V F, SOVA A A, et al. Deposition of multicomponent coatings by cold spray[J]. Surf Coat Tech,2008,202(24):5858-5862.
[44]  MIL-STD-3021, Department of defense manufacturing process standard materials deposition of cold spray[S].
[45]  WANG H T, YANG G J, LI C X. Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating[J]. Vacuum,2008,83(1):146-152.
[46]  LIMA R S, KARTHIKEYAN J, KAY C M, et al. Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings[J]. Thin Solid Films,2002,416(1-2):129-135.
[47]  PRICE T S, SHIPWAY P H, MCCARTNEY D G, et al. A method for characterizing the degree of inter-particle bond formation in cold sprayed coatings[J]. J Therm Spray Techn, 2007,16(4):566-570.
[48]  CHO S, TAKAGI K, KWON H, et al. Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process[J]. Surf Coat Tech,2012,206(16):3488-3494.
[49]  KLINKOV S V, KOSAREV V F, SOVA A A, et al. Calculation of particle parameters for cold spraying of metal-ceramic mixtures[J]. J Therm Spray Techn,2009,18(5-6):944-956.
[50]  YU M, LI W Y, WANG F F, et al. Effect of particle and substrate preheating on particle deformation behavior in cold spraying[J]. Surf Coat Tech,2013,220:174-178.
[51]  SHIN S, XIONG Y M, JI Y, et al. The influence of process parameters on deposition characteristics of a soft/hard composite coating in kinetic spray process[J]. Appl Surf Sci,2008,254(8):2269-2275.
[52]  ZHAO Z B, GILLISPIE B A, SMITH J R. Coating deposition by the kinetic spray process[J]. Surf Coat Tech,2006,200(16-17):4746-4754.
[53]  李海祥, 李相波, 孙明先, 等. 冷喷涂Zn-50Al复合涂层在海水中的耐腐蚀性能[J]. 中国腐蚀与防护学报,2010,30(1):62-66. LI H X, LI X B, SUN M X, et al. Corrosion resistance of cold-sprayed Zn-50Al coatings in seawater[J]. Journal of Chinese Society for Corrosion and Protection,2010,30(1):62-66.
[54]  KOIVULUOTO H, LAGERBOM J, VUORISTO P. Microstructural studies of cold sprayed copper, nickel, and nickel-30% copper coatings[J]. J Therm Spray Techn,2007,16(4):488-497.
[55]  李海祥, 孙明先, 李相波, 等. 冷喷涂65%Zn-Al复合涂层的沉积特性[J]. 中国有色金属学报,2010,20(7):1353-1359. LI H X, SUN M X, LI X B, et al. Depositing characteristic of 65%Zn-Al coatings produced by cold gas dynamic spray[J]. The Chinese Journal of Nonferrous Metals,2010,20(7):1353-1359.
[56]  LEE H Y, JUNG S H, LEE S Y, et al. Alloying of cold-sprayed Al-Ni composite coatings by post-annealing[J]. Appl Surf Sci,2007,53(7):3496-3502.
[57]  LEE H Y, JUNG S H, LEE S Y, et al. Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing[J]. Mat Sci Eng:A,2006,433(1-2):139-143.
[58]  YANDOUZI M, RICHER P, JODOIN B. SiC particulate reinforced Al-12Si alloy composite coatings produced by the pulsed gas dynamic spray process: microstructure and properties[J]. Surf Coat Tech,2009,203(20-21):3260-3270.
[59]  SANSOUCY E, MARCOUX P, AJDELSZTAJN L, et al. Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process[J]. Surf Coat Tech,2008,202(16):3988-3996.
[60]  LI C J, SUO X K, YANG G J, et al. Influence of annealing on the microstructure and wear performance of diamond/NiCrAl composite coating deposited through cold spraying[J]. Mater Sci Forum,2010,638-642:894-899.
[61]  MIGUEL J M, GUILEMANY J M, DOSTA S. Effect of the spraying process on the microstructure and tribological properties of bronze-alumina composite coatings[J]. Surf Coat Tech,2010,205(7):2184-2190.
[62]  HU H X, JIANG S L, TAO Y S, et al. Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni-Al2O3 coating[J]. Nucl Eng Des,2011,241(12):4929-4937.
[63]  VANSTEENKISTE T H, ELMOURSI A, GORKIEWICZ D, et al. Fracture study of aluminum composite coatings produced by the kinetic spray method[J]. Surf Coat Tech,2005,194(1):103-110.
[64]  SHKODKIN A, KASHIRIN A, KLYUEV O, et al. Metal particle deposition stimulation by surface abrasive treatment in gas dynamic spraying[J]. J Therm Spray Techn,2006,15(3):382-386.
[65]  SPENCER K, FABIJANIC D M, ZHANG M X. The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings[J]. Surf Coat Tech,2012,206:3275-3282.
[66]  LI W Y, YANG C L, LIAO H. Effect of vacuum heat treatment on microstructure and microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites[J]. Mater Des,2011,32(1):388-394.
[67]  SRIVASTAVA V C, SCHNEIDER A, UHLENWINKEL V, et al. Spray processing of 2014-Al+SiCp composites and their property evaluation[J]. Mat Sci Eng: A,2005,412(1-2):19-26.
[68]  刘卫, 余敏, 李文亚. 真空热处理对冷喷涂Ni-Al2O3复合涂层组织与显微硬度的影响[J]. 热加工工艺,2010,39(42):196-198. LIU W, YU M, LI W Y. Effect of vacuum heat treatment on microstructure and microhardness of Ni-Al2O3 composite coating prepared by cold spraying[J]. Hot Working Technology,2010,39(42):196-198.
[69]  所新坤, 杨冠军, 李长久. 镍基金刚石复合涂层的冷喷涂制备[J]. 材料研究与应用,2009,3(1):32-36. SUO X K, YANG G J, LI C J. Preparation of Ni-based alloy diamond composite coatings by cold spray[J]. Materials Research and Application,2009,3(1):32-36.
[70]  肖正涛, 李相波, 王佳, 等. 热处理对冷喷涂Cu-20%A12O3复合涂层耐磨损性能的影响研究[J]. 材料导报,2012,26(3):76-80. XIAO Z T, LI X B, WANG J, et al. Effect of heat treatment on tribological properties of cold-sprayed Cu-20%Al2O3 composite coatings[J]. Materials Review,2012,26(3):76-80.
[71]  王锋, 漆波, 陈清华, 等. 超音速冷喷涂Cu-Al2O3复合涂层特性[J]. 材料导报,2009,23(6):47-50. WANG F, QI B, CHEN Q H, et al. Properties of Cu-Al2O3 composite coating in supersonic cold gas dynamic spraying[J]. Materials Review,2009,23(6):47-50.
[72]  NA H, BAE G, SHIN S, et al. Advanced deposition characteristics of kinetic sprayed bronze/diamond composite by tailoring feedstock properties[J]. Compos Sci Technol,2009,69(3-4):463-468.
[73]  ZHOU X, MOHANTY P. Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks’ solution[J]. Electrochim Acta,2012,65:134-140.
[74]  MORIMOTO J, ONODA T, SASAKI Y, et al. Improvement of solid cold sprayed TiO2-Zn coating with direct diode laser[J]. Vacuum,2004,73(3-4):527-532.
[75]  CHERIGUI M, LI W, HAMZAOUI R, et al. Microstructure and magnetic properties of FeSiBNbCu-Al cold spray coatings[J]. Eur Phys J Appl Phys,2008,43(1):79-86.
[76]  STEENKISTE T V. Kinetic sprayed rare earth iron alloy composite coatings[J]. J Therm Spray Techn,2006,15(4):501-506.
[77]  DOSTA S, COUTO M, GUILEMANY J M. Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates[J]. Acta Mater,2013,61(2):643-652.
[78]  WATANABE M, KOMATSU M, KURODA S, et al. WC-Co/Al multilayer coatings by warm spray deposition[J]. J Therm Spray Techn,2012,21(3-4):597-60.
[79]  YANDOUZI M, SANSOUCY E, AJDELSZTAJN L, et al. WC-based cermet coatings produced by cold gas dynamic and pulsed gas dynamic spraying processes[J]. Surf Coat Tech,2007,202(2):382-390.
[80]  陈利修, 陈铭冷. 冷喷涂Cu-Zn-Al2O3修复斯太尔发动机水道腐蚀区域的涂层性能分析[J]. 机械设计与研究,2013,29(1):69-74. CHE L X, CHEN M L. The coating performance of cold spraying Cu-Zn-Al2O3 for repairing the waterway corrosion area of Steyr engine[J]. Machine Design and Research,2013,29(1):69-74.
[81]  张建设. 美空军研究冷喷涂技术维修UH-60直升机[J]. 表面工程资讯,2012,(1):18. ZHANG J S. Studying of repairing UH-60 helicopter by cold spraying of Air Force research laboratory[J]. Information of Surface Engineering,2012,(1):18.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133